The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Back to the Basics: Rebuilding a steering coupler rag joint

Tx Firefighter · 03-26-2014, 02:12 PM

That's correct. You can only install the coupler onto the box one way. Both the coupler bore and the box shaft have a flat spot on them. You line up the flat spots and it pushes right into place. If you don't have the flat spots lined up, it's not gonna go on regardless of what you do.

03-26-2014, 02:12 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Back to the Basics: Rebuilding a steering coupler rag joint That's correct. You can only install the coupler onto the box one way. Both the coupler bore and the box shaft have a flat spot on them. You line up the flat spots and it pushes right into place. If you don't have the flat spots lined up, it's not gonna go on regardless of what you do. __________________ I'm on the Instagram- @Gearhead_Kevin