Re: 5.3 swap into 72 C-10 Part list.
I'm going to bag it. I will require the pan to be at the crossmember or higher. Looks like the Caddy pan will be my best bet then.
Will I need all the CTS internals that go in the pan or will the truck pan guts work inside it.
I have a set of unknown adaptor plates, sounds like sliders are the builders choice, is it because of the adjustability or are the built better than the others?
__________________
Not Grandpa's C-20 anymore...
383 Stroker 425HP, 485Ft/Lbs
Lowered 3.5" Front / 5" Rear
66,000 miles.
Alberta, CANADA
|