The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Evldoer · 01-05-2018, 10:34 PM

I used a type II pump, removed the vac pump. Machined up an aluminum bracket that mounts to the 4 holes that the vac pump used.
Im going to delete the DOD/AFM so hopefully the engine will make enough vacuum to operate the power brakes. If not i will just add an electric vacuum pump.
I didnt like any of the aftermarket offerings to mount a power steering pump, and felt this might be a better solution.

01-05-2018, 10:34 PM	#18
Evldoer Registered User Join Date: Nov 2017 Location: Mayville Posts: 19	Re: Gen V Engine swap info I used a type II pump, removed the vac pump. Machined up an aluminum bracket that mounts to the 4 holes that the vac pump used. Im going to delete the DOD/AFM so hopefully the engine will make enough vacuum to operate the power brakes. If not i will just add an electric vacuum pump. I didnt like any of the aftermarket offerings to mount a power steering pump, and felt this might be a better solution.