![]() |
![]() |
#1 |
Registered User
![]() Join Date: May 2005
Location: Reading, Kansas
Posts: 628
|
![]()
Some time ago I removed the water pump from my 66 250/6 and while pulling the fan out carefully I dropped all the parts onto the ground below me. Now is the time to replace pump ,pulley, extension, and fan. My problem is that with all those parts there is a round plate that is cupped on the oter edge with 4 hole to match up with the fan. My question is where does this disc belong? under the pulley? Can any one help me out?................Kirby
Last edited by l79m20; 08-07-2009 at 06:31 PM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2009
Location: Los Lunas NewMexico
Posts: 60
|
Re: Assembly Help
Sounds like a fan spacer to me but cant be sure. Someone will chime in who knows exactly what it is. Pictures are helpful in these stressful times......
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Mar 2002
Location: Peru, Indiana
Posts: 741
|
Re: Assembly Help
Yep............I believe you are talking about a spacer.................It goes between the water pump and the pulley to linr up with the other pulleys.........Hemmit
|
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: May 2005
Location: Reading, Kansas
Posts: 628
|
Re: Assembly Help
Thanks alot Hemmit , did'nt want to take it apart again.........Cheers.....Kirby
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|