12-13-2012, 01:39 PM | #1 |
Registered User
Join Date: May 2009
Location: Fayetteville, NC
Posts: 725
|
700R4 Driveshaft
So I may pull the trigger on a 700 here really soon, is there a company out there that supplies ready-made driveshafts for our 67-72 Chevys with a 700? And while I am askin what about a crossmember? Lookin for that as well. Thanks guys
Tryin to get this beast done by March for the "Run to the Sun" so I can shakedown any problems before the real road trip!!! Team HRPT
__________________
Jason TEAM C10 HOT ROD POWER TOUR
689 Short Step 68 Step Trucks Sold: 70 GMC, 72 K5 Members met: Andy4639 GCncsuHD CSGAS zicc1835 hotrod farm truck Mingrao Bhelton brenthiggins |
12-13-2012, 01:40 PM | #2 |
Registered User
Join Date: Feb 2012
Location: Ventura,Ca
Posts: 745
|
Re: 700R4 Driveshaft
Bowtie Overdrives has the crossmember.
__________________
'67 C20 LBW |
12-13-2012, 01:44 PM | #3 |
Registered User
Join Date: May 2009
Location: Fayetteville, NC
Posts: 725
|
Re: 700R4 Driveshaft
__________________
Jason TEAM C10 HOT ROD POWER TOUR
689 Short Step 68 Step Trucks Sold: 70 GMC, 72 K5 Members met: Andy4639 GCncsuHD CSGAS zicc1835 hotrod farm truck Mingrao Bhelton brenthiggins |
12-13-2012, 07:18 PM | #4 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: 700R4 Driveshaft
sas far as driveshaft it depends what tranny you have in there now ? if you have a turbo350 it is best to just take to a local shop and have it shortened the couple inches needed and aat the same time have it balanced
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
12-13-2012, 08:15 PM | #5 |
Senior Member
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
|
Re: 700R4 Driveshaft
A stock 67-72 auto crossmember works fine, Actually better than most aftermarket crossmembers.
Always, I mean Always Measure the driveshaft length! Here a form you can fill out & take to the DS shop, 2-Piece http://www.dennysdriveshaft.com/app/...iagrams/m.html 1-piece http://www.dennysdriveshaft.com/app/...iagrams/b.html |
12-13-2012, 08:47 PM | #6 |
Registered User
Join Date: May 2009
Location: Fayetteville, NC
Posts: 725
|
Re: 700R4 Driveshaft
Thanks guys we have no trans at the moment just the stock 3 speed and we do have a DS but unsure what trans was in this truck to begin with. Thanks for y'all's help!
Posted via Mobile Device
__________________
Jason TEAM C10 HOT ROD POWER TOUR
689 Short Step 68 Step Trucks Sold: 70 GMC, 72 K5 Members met: Andy4639 GCncsuHD CSGAS zicc1835 hotrod farm truck Mingrao Bhelton brenthiggins |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|