![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: May 2021
Location: dunellen nj
Posts: 1
|
3-5 drop with a stock rear spring rate
I lowered my truck several years ago with drop spindles and rear coils and spring locator kit.The rear spring is to soft,So I tried new rear springs and they are soft too.Does someone make rear coil lowering springs that have the stock spring rate?So I can still load **** in the back?Thanks
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,528
|
Re: 3-5 drop with a stock rear spring rate
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2023
Location: Waterloo Iowa
Posts: 243
|
Re: 3-5 drop with a stock rear spring rate
I have 2” drop springs in the rear of mine. I went with air bags inside the coils. I found a bag that was 5.5”x 8.5” br AirLift that fit my springs.
I also have a new set of bags that are 5.5”x 6” that were too short for my springs. I can find the part numbers if you are interested. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Oct 2023
Location: Waterloo Iowa
Posts: 243
|
Re: 3-5 drop with a stock rear spring rate
I found the part number for the 5.5”x8.5”, it is 60924. The smaller bags I have are part number 60811.
I did have to drill a hole through the upper spring clamp and frame for the air line to the bag. It was easy. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|