Help with Trans and Transfer Case isolators

[MDFarms]

So can anyone tell me if the transfer case and transmission rubber isolators/bushings the same up through the later years? I'm needing all the above for my 1972 K10 rebuild and not aure what years are the same.

[BASE]

These worked on my ‘68 K10: https://www.summitracing.com/parts/ens-3-1106g

[MDFarms]

Originally Posted by BASE

These worked on my ‘68 K10: https://www.summitracing.com/parts/ens-3-1106g

Thanks I also need the round ones under transfer case. Would like to find NOS if available.

[Classic Bowties]

Originally Posted by MDFarms

Thanks I also need the round ones under transfer case. Would like to find NOS if available.

If also needing the t/c side support rubber bushings, we have some NOS upper/lower bushings available in the below linked "Several GM NOS 67-72 Truck Parts" f/s thread, the bushings are item #5 on the NOS parts list. Have a look and let us know, Mel

https://www.67-72chevytrucks.com/vbo...d.php?t=798288

.

[MDFarms]

Originally Posted by Classic Bowties

If also needing the t/c side support rubber bushings, we have some NOS upper/lower bushings available in the below linked "Several GM NOS 67-72 Truck Parts" f/s thread, the bushings are item #5 on the NOS parts list. Have a look and let us know, Mel

https://www.67-72chevytrucks.com/vbo...d.php?t=798288

.

I will take a set please. I like to use USPS checks if that's ok and bundle with the accelerator pin and spring I messaged about. Any other lower bushings I need? I'm going off memory only. I have the retainer clips already.

[Classic Bowties]

Originally Posted by MDFarms

I will take a set please. I like to use USPS checks if that's ok and bundle with the accelerator pin and spring I messaged about. Any other lower bushings I need? I'm going off memory only. I have the retainer clips already.

Okay, sending a USPS money order works well it just slows the process down a little bit and yes, we will combine/bundle the NOS pedal spring/pin setup and send along with the NOS t/c bushings. This area of the board is not for completing sales of parts, to confirm interest you will need to post a reply in that above linked parts board f/s thread where the NOS bushings are listed/offered. Thanks, Mel