Ford Rack and Pinion to LS Power Steering lines

[Mallory69]

Does anyone make a kit for stainless/braided power steering lines? I am using a 93 Thunderbird rack and a 07 LS 3 pump. I see some AN fittings on the Borgeson site but not a complete kit. Anyone know of someone making a kit????

[andrewmp6]

Ask rob at nolimit he uses the same rack on some of his kits he might know.

[jweb]

I bought a kit here http://www.purechoicemotorsports.com...rod/prd196.htm

It might work for you, but the 45 degree fittings hit the crossmember on my 51. So buying pieces instead of a kit would have been better.

[Goats86]

Hey Mallory69, How about posting up how you accomplished this? What tie rod ends, adjusting sleeves, and any brackets you built?

[andrewmp6]

http://www.nolimitengineering.com/pr...tegory=6157532 it uses a thunderbird rack maybe thats what he has.

[Mallory69]

Goats86. You can check out some pics on my build thread http://67-72chevytrucks.com/vboard/s...errerid=155940
I set up a jig off the original lower ball joint and just built my suspension off of that reference point. Tie rod ends came from Speedway and I made the tie rod ends. I recently bought a set of billet tie rod ends from Alston chassis.

[Mallory69]

Thanks Andrew I am probably going with the kit jweb mentioned in his post above.