FatKids 71 build thread - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Fatkid1983 · 02-14-2012, 11:45 PM

ok just getting started on it, so i figured i would start the thread as well. i have been trying to buy this truck from my dad for years, needless to say i finally talked him into selling it. i have done a couple ratrods and 4x4 offroad builds but this will be my first " pretty" classic wish me luck

Fatkid1983 · 02-15-2012, 12:20 AM

thanks MJs69CST
i plan to have a truck that looks stock, but isnt. she will get a fresh coat of med blue and white all new molding and trim, interior will be restored to her original glory plus of coarse a decent sound system. not to crazy under the hood, but have the abilty to hold her own against the ricers. and i would really like to put her on air not crazy low just enough to notice. anyone want to chime in on a good set up for the air that wont completly brake the bank but isnt junk i would appriecate it

**67cheby** · 02-15-2012, 11:15 AM

just go simple and buy the bag plates and cups for the front and the bags to replace the springs in the back and you are only out a few hundred , put them on manual schrader valves and you have cheap air ride !

Fatkid1983 · 02-15-2012, 03:20 PM

Thanks 67cheby I just ordered the kit. Should be here by the weekend.
Posted via Mobile Device

**67cheby** · 02-15-2012, 03:22 PM

cool, simple install waiting on pics !

JRHernandez88 · 02-15-2012, 03:40 PM

How much does this kit lower the truck and about how much does it cost? Got pics of a truck with this simple setup?

**67cheby** · 02-15-2012, 04:17 PM

here is mine with that set up !

Fatkid1983 · 02-15-2012, 10:37 PM

Hey 67cheby do you have any install pics?
Posted via Mobile Device

**67cheby** · 02-15-2012, 11:02 PM

I will look tomorrow when I am at my computer
Posted via Mobile Device

Fatkid1983 · 02-18-2012, 04:29 AM

Bump
Posted via Mobile Device

Fatkid1983 · 02-27-2012, 12:37 AM

67cheby. Did ya ever find those pics?
Posted via Mobile Device

**67cheby** · 02-27-2012, 11:09 AM

man i am sorry i meant to get back to you , i sure dont have , i guess i deleted those pics when i went to my newest suspension set up

Fatkid1983 · 03-05-2012, 11:01 PM

so im still slowly gathering parts for the air ride set up. this is what i have or have ordered. paddle valve and guage set up from street machinery... thanks boris
i already had a set of bags from a previous project so im using them on the rear
will be getting the front bags and plates from jason at avs www.airbagparts.com
i scored a york compressor from work... i work in a scrap yard.... pics to follow on the install

Fatkid1983 · 03-05-2012, 11:03 PM

heres my valve set up, now i need to figure out if i want to hide it or simple place on bottom of dash

Fatkid1983 · 03-11-2012, 03:27 AM

Started slowly installing the air ride in the 71 more pics to follow

Posted via Mobile Device

Fatkid1983 · 03-11-2012, 07:58 PM

Hit the swapmeet today and got another York pump and 5 gal air tank all for 60 bucks! Now as soon as my feet stop hurting, its out to the shop to fab up some mounts for the York
Posted via Mobile Device

Fatkid1983 · 03-18-2012, 12:26 AM

got the air ride on in the rear

^^^^its a video click it ^^^^^^

Fatkid1983 · 03-18-2012, 12:30 AM

more pics

Fatkid1983 · 03-28-2012, 02:29 PM

Headed off to paint tomorrow
Posted via Mobile Device

**67cheby** · 03-28-2012, 04:06 PM

looking good

fastcam1 · 03-28-2012, 07:07 PM

Subscribed!nice to see more members from the area

Posted via Mobile Device

gearys 5600 · 03-28-2012, 08:08 PM

Lookin good..

Looks like you started with a solid truck.

Fatkid1983 · 03-31-2012, 01:43 AM

Yeah its pretty solid, couple of bad spots but nothing that can't be fixed with welder lol. Body guy say it should be done by next weekend. So I'm getting my camera ready!
Posted via Mobile Device

Fatkid1983 · 03-31-2012, 01:44 AM

Fastcam1 got any pic of the air ride setup?
Posted via Mobile Device

fastcam1 · 03-31-2012, 01:51 AM

Quote:

Originally Posted by Fatkid1983

Fastcam1 got any pic of the air ride setup?
Posted via Mobile Device

No my truck is pretty torn down right now, actually just mounted my rear bags the other day. Also plan on picking up my air management from Boris as soon as I get some $$$
Posted via Mobile Device

02-14-2012, 11:45 PM	#1
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	FatKids 71 build thread ok just getting started on it, so i figured i would start the thread as well. i have been trying to buy this truck from my dad for years, needless to say i finally talked him into selling it. i have done a couple ratrods and 4x4 offroad builds but this will be my first " pretty" classic wish me luck Attached Images __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

02-15-2012, 12:20 AM	#2
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: FatKids 71 build thread thanks MJs69CST i plan to have a truck that looks stock, but isnt. she will get a fresh coat of med blue and white all new molding and trim, interior will be restored to her original glory plus of coarse a decent sound system. not to crazy under the hood, but have the abilty to hold her own against the ricers. and i would really like to put her on air not crazy low just enough to notice. anyone want to chime in on a good set up for the air that wont completly brake the bank but isnt junk i would appriecate it __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

02-15-2012, 11:15 AM	#3
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: FatKids 71 build thread just go simple and buy the bag plates and cups for the front and the bags to replace the springs in the back and you are only out a few hundred , put them on manual schrader valves and you have cheap air ride ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-15-2012, 03:20 PM	#4
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: FatKids 71 build thread Thanks 67cheby I just ordered the kit. Should be here by the weekend. Posted via Mobile Device __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

02-15-2012, 03:22 PM	#5
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: FatKids 71 build thread cool, simple install waiting on pics ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-15-2012, 03:40 PM	#6
JRHernandez88 Registered User Join Date: Feb 2012 Location: San Antonio, Texas Posts: 21	Re: FatKids 71 build thread How much does this kit lower the truck and about how much does it cost? Got pics of a truck with this simple setup?

02-15-2012, 04:17 PM	#7
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: FatKids 71 build thread here is mine with that set up ! Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-15-2012, 10:37 PM	#8
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: FatKids 71 build thread Hey 67cheby do you have any install pics? Posted via Mobile Device __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

02-15-2012, 11:02 PM	#9
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: FatKids 71 build thread I will look tomorrow when I am at my computer Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-18-2012, 04:29 AM	#10
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: FatKids 71 build thread Bump Posted via Mobile Device __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

02-27-2012, 12:37 AM	#11
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: FatKids 71 build thread 67cheby. Did ya ever find those pics? Posted via Mobile Device __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

02-27-2012, 11:09 AM	#12
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: FatKids 71 build thread man i am sorry i meant to get back to you , i sure dont have , i guess i deleted those pics when i went to my newest suspension set up __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-05-2012, 11:01 PM	#13
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: FatKids 71 build thread so im still slowly gathering parts for the air ride set up. this is what i have or have ordered. paddle valve and guage set up from street machinery... thanks boris i already had a set of bags from a previous project so im using them on the rear will be getting the front bags and plates from jason at avs www.airbagparts.com i scored a york compressor from work... i work in a scrap yard.... pics to follow on the install __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

03-05-2012, 11:03 PM	#14
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: FatKids 71 build thread heres my valve set up, now i need to figure out if i want to hide it or simple place on bottom of dash Attached Images __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

03-11-2012, 03:27 AM	#15
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: FatKids 71 build thread Started slowly installing the air ride in the 71 more pics to follow Posted via Mobile Device __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/



Register or Log In To remove these advertisements.

03-11-2012, 07:58 PM	#16
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: FatKids 71 build thread Hit the swapmeet today and got another York pump and 5 gal air tank all for 60 bucks! Now as soon as my feet stop hurting, its out to the shop to fab up some mounts for the York Posted via Mobile Device __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

03-18-2012, 12:26 AM	#17
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: FatKids 71 build thread got the air ride on in the rear ^^^^its a video click it ^^^^^^ __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

03-18-2012, 12:30 AM	#18
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: FatKids 71 build thread more pics Attached Images __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

03-28-2012, 02:29 PM	#19
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: FatKids 71 build thread Headed off to paint tomorrow Posted via Mobile Device __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

03-28-2012, 04:06 PM	#20
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: FatKids 71 build thread looking good __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-28-2012, 07:07 PM	#21
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: FatKids 71 build thread Subscribed!nice to see more members from the area Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

03-28-2012, 08:08 PM	#22
gearys 5600 Registered User Join Date: Mar 2010 Location: tulsa,ok Posts: 1,085	Re: FatKids 71 build thread Lookin good.. Looks like you started with a solid truck. __________________ MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=423629 1969 custom/10 swb--SOLD 1968 swb 50th anniv.--SOLD 1967 camaro ss/rs..LS-6-speed, 16-year long project 1956 chevy nomad 1955 chevy 210 2-dr sedan 1978 el-camino ss 1-owner

03-31-2012, 01:43 AM	#23
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: FatKids 71 build thread Yeah its pretty solid, couple of bad spots but nothing that can't be fixed with welder lol. Body guy say it should be done by next weekend. So I'm getting my camera ready! Posted via Mobile Device __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

03-31-2012, 01:44 AM	#24
Fatkid1983 Registered User Join Date: Feb 2012 Location: yelm Wa. Posts: 423	Re: FatKids 71 build thread Fastcam1 got any pic of the air ride setup? Posted via Mobile Device __________________ 1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/

Register or Log In To remove these advertisements.