|
04-01-2010, 02:40 PM
|
#1 |
|
Registered User
Join Date: Mar 2005
Location: Las Vegas, NV
Posts: 84
|
Tahoe C-Notch
I bought a Tahoe that came with everything to flip the rear axle except for the c-notch. I have tried searching but no luck. Is the c-notch for a Tahoe and the pick up the same? And is there a recommended notch to buy?
Thanks in advance, Brandon. |
|
|
|
04-01-2010, 02:52 PM
|
#2 |
|
Registered User
Join Date: Mar 2005
Location: Las Vegas, NV
Posts: 84
|
Tahoe C-Notch
I bought a Tahoe that came with everything to flip the rear axle except for the c-notch. I have tried searching but no luck. Is the c-notch for a Tahoe and the pick up the same? And is there a recommended notch to buy?
Thanks in advance, Brandon. |
|
|
|
|
04-01-2010, 03:20 PM
|
#3 |
|
One day...
Join Date: Apr 2008
Location: Tuttle, Ok
Posts: 9,240
|
Re: Tahoe C-Notch
The frames on the trucks are straight where you need to install it, i am not sure about the tahoes but i wouldnt figure it would be that much difference. I have installed 2 DJM kits on trucks and they fit really well and never had any problems with them.
Last edited by scotts62; 04-01-2010 at 03:20 PM. Reason: oops |
|
|
|
|
04-01-2010, 09:24 PM
|
#4 |
|
Old Skool Club
 
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Tahoe C-Notch
What year Tahoe? 2 or 4WD?
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
|
|
|
|
04-01-2010, 11:09 PM
|
#5 |
|
Registered User
Join Date: Feb 2000
Location: Wichita Falls, Texas
Posts: 3,153
|
Re: Tahoe C-Notch
I can't speak from experience for a 2-door Tahoe, but if yours is a 4-door, the frames are curved over the axle, so a truck notch wouldn't work.
|
|
|
|
|
04-02-2010, 03:32 PM
|
#6 |
|
Registered User
Join Date: Mar 2005
Location: Las Vegas, NV
Posts: 84
|
Re: Tahoe C-Notch
Sorry, its a 96 2dr tahoe.
|
|
|
|
|
04-02-2010, 03:53 PM
|
#7 |
|
Frequent Flyer
Join Date: Aug 2009
Location: Tulsa, OK
Posts: 2,258
|
Re: Tahoe C-Notch
I believe they are different & I also just looked @ BellTechs website & the part #'s are different for a truck & 2dr Tahoe flip kit.
|
|
|
|
|
04-28-2010, 01:24 PM
|
#8 |
|
Registered User
Join Date: Apr 2010
Location: dallas tx.
Posts: 101
|
Re: Tahoe C-Notch
They do have a c notch for a 2 door tahoe mine has one HOPE THIS PIC HELPS OUT THIS IS MY 98 2 DR
Last edited by 98lowtahoe; 04-28-2010 at 01:24 PM. |
|
|
|
|
04-30-2010, 06:52 PM
|
#9 |
|
Registered User
Join Date: Mar 2005
Location: Las Vegas, NV
Posts: 84
|
Re: Tahoe C-Notch
Thanks for the pic. I know what I to do now.
|
|
|
|
|
04-30-2010, 06:59 PM
|
#10 | |
|
Registered User
Join Date: Apr 2010
Location: dallas tx.
Posts: 101
|
Re: Tahoe C-Notch
Quote:
|
|
|
|
|
|
05-04-2010, 07:48 PM
|
#11 |
|
Registered User
Join Date: Apr 2010
Location: dallas tx.
Posts: 101
|
Re: Tahoe C-Notch
If u need anything bro let me know again
|
|
|
|
|
06-30-2017, 02:26 AM
|
#12 |
|
Registered User
Join Date: Jun 2017
Location: Boise, ID
Posts: 3
|
Re: Tahoe C-Notch
I know this is an old thread, but, I had some questions on a notch kit for a 98 2 door Tahoe. I have had her for 10+ years and she already has a flip kit and springs in the front. I have 2" drop spindles and 1" drop shakles coming for it from belltech. I have already ground out the bump stop brackets and was debating on if I needed to buy the notch kit, or if anyone has had any success with notching the frame without the kit, or had any better routes getting more clearance for the axle without dropping 3 bills? Also, does anyone run that low of a drop in their Tahoe with 20" wheels, if so, what series tire gives the best clearance in the front? Thanks for any help and info in advance.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
