|
01-15-2003, 09:49 PM
|
#1 |
|
Registered User
Join Date: Jan 2003
Location: orangeville,on. Canada
Posts: 1
|
79-87 frames
Hello folks,
This is my first time here, so thanks for your time. My question for anyone that might know. Is there any difference between a 1/2 ton frame and a 3/4 ton frame between 79-87. I know almost all of the body panels are interchangeable, but I'm looking a just the frames. I was told the steel is thicker on the 3/4 ton. But then a few guys have told me theres no difference. Thanks again for your time |
|
|
|
01-15-2003, 09:54 PM
|
#2 |
|
Registered User
Join Date: Jan 2003
Location: sandy,utah
Posts: 2
|
as far as I know and have been told the chassis are the same except for maybe cross members depending on engine/tranny/transfercase
|
|
|
|
|
01-16-2003, 01:39 AM
|
#3 |
|
Ultimate Diesel Dude
Join Date: Oct 2002
Location: Southwest Missouri
Posts: 328
|
Yes, as far as I know, the frames are the same. The one-ton (30) series has a thicker and taller frame.
__________________
Project truck: '81 C/20 converted to 6.2L TURBO DIESEL bored .040", gear drive, 6.5L injectors/pump, custom pistons, custom 4" exhaust, 700R4, 4.10's Daily Driver: '95 K1500 Tahoe, 6.5L TURBO DIESEL, NP241, 4L80E, 3.42's |
|
|
|
|
01-16-2003, 03:34 AM
|
#4 |
|
Registered User
Join Date: Mar 2001
Location: Nashville, Tennessee
Posts: 225
|
one ton is thicker, taller. 1/2 ton and 3/4 ton are the same.
Keith |
|
|
|
|
01-16-2003, 07:45 AM
|
#5 |
|
Registered User
Join Date: Feb 2001
Location: Southwest Missouri
Posts: 153
|
Correct me if I'm wrong, but didn't the front of the frames change in 81? 73-80 the same, 81-87 the same. Front frame horns changed in 81 to accept a different style of bumper.
Bob |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
