Baggin' a 71' Sub???????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged91 · 01-25-2004, 11:20 PM

Anybody have any pics of any 67-72 Subs/Panels that have been bagged? I am lookin' for pics of the setups themselves, not the outside of the truck.

Thanks!
Joe

Slammed67 · 01-26-2004, 03:27 PM

Should be the same thing as a '67-72 truck. Right?

bagged91 · 01-26-2004, 06:16 PM

Yea... I'm not too familiar with these monsters yet and wasn't sure if there is anything Sub' specific I had to watch out for... I don't want to come through the floor either.

Basically, this is how I want it to sit when done....

fastbagged68 · 01-26-2004, 07:09 PM

to get it that low you will have to notch the floor for the pumpkin to come up. You can get them pretty low with out doing much. Bags and drop spindles and 2 inch blocks. And you are sitting pretty good.

bagged91 · 01-26-2004, 10:07 PM

Maybe I will look into cutting the floor. I may get rid of the termite buffet and replace it with some 16 ga. If I do that then I can raise the floor up a little(wheel wells too).

67dragtruck · 01-27-2004, 01:09 AM

Man that is one sweet pic of the suburban. I would love to have that thing.

Tom

bagged91 · 01-27-2004, 06:29 PM

Yeah, that's L150's burb. He has a nice blacksuede F150 w/ a Navigator clip on it too..... I like the fact that his sub is cosmetically stock(I believe it is even unrestored) and slammed, nothin wild, just CLEEAAANNN!!!

Izzy · 01-27-2004, 07:18 PM

Quote:

Originally posted by bagged91
Yeah, that's L150's burb. He has a nice blacksuede F150 w/ a Navigator clip on it too..... I like the fact that his sub is cosmetically stock(I believe it is even unrestored) and slammed, nothin wild, just CLEEAAANNN!!!

He must have bought that F150 from Jeff down near Houston. I knew it was for sale but didn't realize he had sold it.

98L150 · 01-28-2004, 12:02 PM

Yea that is my orange sub and I am Jeff from Houston area that owned and built the black suede F150 as well. I sold the F-150 right before Christmas.

The sub chassis is the same as a long bed truck of this year model. And for all that are woundering the sub body is un-restored. I resently in the past few weeks recovered the seats with black and white hounds tooth, put a new 350 crate motor and 700R4 with new flowmaster exhaust tucked up in the frame all the way out the back. The only thing I am waiting on right now is the new Boyd Magneto's I ordered which should be in this week hopefully. I will post more pics once they arrive.

Jeff

**N2TRUX** · 01-28-2004, 12:14 PM

Nice Burb Jeff. It looks like you need to clean the windows though

:p

98L150 · 01-28-2004, 01:53 PM

N2TRUX,

You know I do not do windows. I let friend get nerved up about them and let them do them right. Not enough paceice here for those darn things on any of my rides.

Izzy · 01-28-2004, 05:36 PM

Quote:

Originally posted by 98L150
Yea that is my orange sub and I am Jeff from Houston area that owned and built the black suede F150 as well. I sold the F-150 right before Christmas.

The sub chassis is the same as a long bed truck of this year model. And for all that are woundering the sub body is un-restored. I resently in the past few weeks recovered the seats with black and white hounds tooth, put a new 350 crate motor and 700R4 with new flowmaster exhaust tucked up in the frame all the way out the back. The only thing I am waiting on right now is the new Boyd Magneto's I ordered which should be in this week hopefully. I will post more pics once they arrive.

Jeff

Knew that neighborhood looked familiar.

Mike with the flat and purple flamed and BD 99+ Silvy that lives around the corner from you was supposed to roll me by your crib last time I was there to check it out before you sold it.

bagged91 · 01-28-2004, 08:53 PM

Hi Jeff,
Did you cut the floor in the back to get it down or will it lay like that w/o cutting.

Did you use the AirLift kit or how is the rear set up???

I want to set mine up similar to how yours is. I don't need or want it to lay out completely, I've got my 91 for that.....

Any help would be great!

Thanks! Joe

BTW - The Hot Rod Lincoln kicked A$$!!!!!!!

**N2TRUX** · 01-29-2004, 12:15 AM

Quote:

Originally posted by fiveeightchevy
...Mike with the flat and purple flamed and BD 99+ Silvy that lives around the corner from you was supposed to roll me by your crib last time I was there to check it out before you sold it.

There goes the neighborhood...

Yeah Jeff I still laugh every time I think of the window story...:p

98L150 · 01-29-2004, 01:47 AM

Bagged 91,

Yes the floor of the sub is cut in the year to allow the rear end pumpkin to come a little higher with a c-notch and a 2 inch block. The air ride sytem is air ride technologies. I just got my early classics panhard bar in yesterday and will put it on this weekend. It is needed to keep the rear end side to side movement to minimum. THe wheels clear now, but my new wheels are 20 x 10's and the side to side movement would be a problem with those, plus it is just wrong to have that much movement.

Thanks the complements. Any help you may need please feel free to ask,

98L150 · 01-29-2004, 01:49 AM

fiveeightchevy,

Thats cool, I have known Mike for a couple of year now. He has a nice ride.

Jeff

bagged91 · 01-29-2004, 11:03 AM

Thanks Jeff!!! I can't wait for this snow to melt so I can get outside and crawl under the sub.......

01-25-2004, 11:20 PM	#1
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Baggin' a 71' Sub???????? Anybody have any pics of any 67-72 Subs/Panels that have been bagged? I am lookin' for pics of the setups themselves, not the outside of the truck. Thanks! Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

01-26-2004, 03:27 PM	#2
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Should be the same thing as a '67-72 truck. Right? __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

01-26-2004, 06:16 PM	#3
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Yea... I'm not too familiar with these monsters yet and wasn't sure if there is anything Sub' specific I had to watch out for... I don't want to come through the floor either. Basically, this is how I want it to sit when done.... Attached Images __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

01-26-2004, 10:07 PM	#5
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Maybe I will look into cutting the floor. I may get rid of the termite buffet and replace it with some 16 ga. If I do that then I can raise the floor up a little(wheel wells too). __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

01-27-2004, 01:09 AM	#6
67dragtruck Registered User Join Date: May 2001 Location: Bethlehem, GA, USA Posts: 389	sweet burb Man that is one sweet pic of the suburban. I would love to have that thing. Tom

01-26-2004, 07:09 PM	#4
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	to get it that low you will have to notch the floor for the pumpkin to come up. You can get them pretty low with out doing much. Bags and drop spindles and 2 inch blocks. And you are sitting pretty good.

01-27-2004, 06:29 PM	#7
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Yeah, that's L150's burb. He has a nice blacksuede F150 w/ a Navigator clip on it too..... I like the fact that his sub is cosmetically stock(I believe it is even unrestored) and slammed, nothin wild, just CLEEAAANNN!!! __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

01-28-2004, 12:02 PM	#9
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	My sub Yea that is my orange sub and I am Jeff from Houston area that owned and built the black suede F150 as well. I sold the F-150 right before Christmas. The sub chassis is the same as a long bed truck of this year model. And for all that are woundering the sub body is un-restored. I resently in the past few weeks recovered the seats with black and white hounds tooth, put a new 350 crate motor and 700R4 with new flowmaster exhaust tucked up in the frame all the way out the back. The only thing I am waiting on right now is the new Boyd Magneto's I ordered which should be in this week hopefully. I will post more pics once they arrive. Jeff

01-28-2004, 12:14 PM	#10
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Nice Burb Jeff. It looks like you need to clean the windows though :p __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-28-2004, 01:53 PM	#11
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	burb window N2TRUX, You know I do not do windows. I let friend get nerved up about them and let them do them right. Not enough paceice here for those darn things on any of my rides.

01-28-2004, 08:53 PM	#13
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	ATTN: 98L150 Hi Jeff, Did you cut the floor in the back to get it down or will it lay like that w/o cutting. Did you use the AirLift kit or how is the rear set up??? I want to set mine up similar to how yours is. I don't need or want it to lay out completely, I've got my 91 for that..... Any help would be great! Thanks! Joe BTW - The Hot Rod Lincoln kicked A$$!!!!!!! __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

01-29-2004, 01:47 AM	#15
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Cut Floor? Yes Bagged 91, Yes the floor of the sub is cut in the year to allow the rear end pumpkin to come a little higher with a c-notch and a 2 inch block. The air ride sytem is air ride technologies. I just got my early classics panhard bar in yesterday and will put it on this weekend. It is needed to keep the rear end side to side movement to minimum. THe wheels clear now, but my new wheels are 20 x 10's and the side to side movement would be a problem with those, plus it is just wrong to have that much movement. Thanks the complements. Any help you may need please feel free to ask, Attached Images

01-29-2004, 01:49 AM	#16
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	attn: fiveeightchevy fiveeightchevy, Thats cool, I have known Mike for a couple of year now. He has a nice ride. Jeff

01-29-2004, 11:03 AM	#17
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Thanks Jeff!!! I can't wait for this snow to melt so I can get outside and crawl under the sub....... __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.