Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
12-12-2011, 08:24 PM | #1 |
Windy Corner of a Dirty Street
Join Date: Jun 2003
Location: Pueblo West, Colorado
Posts: 2,926
|
1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
So I got a new project lined up. My father in-law has a really clean ’93 2wd Sportside with a 4.3L 5-speed that just needs more power. He has always wanted a 454SS truck and I happen to have a Gen V 7.4L with 5,000 miles on it lying around (not a reman but a brand new crate 7.4L). It is not a roller engine but I did add Vortec heads. The plan is to drop the 7.4L in and buy a new 7.4L throttle body so we can keep TBI. The 7.4L is set up with L29 accessory brackets which is nice so I don’t have to use another POS R4 A/C compressor.
I spoke to Howell Engine Development and they can reprogram the current 4.3L PROM to a 7.4L w/manual trans calibrations as well as add a hot tune and turn off EGR and still use the 4.3L engine harness. I also realize the NV3500 trans is light duty and the 8.5” rear axle will be taxed but my FIL is 70 years old with a light foot so I am not too worried about those components. That said, a big block with a NV3500 in a light little truck should be fun to drive when it is done! I have never done any major modifications to any of the GMT400 trucks so I have a few questions for you all. 1) What a needs to be done to the engine mounts to go from a V6 to a V8? It looks like just remove the V6 bracket and move the mount to where the V6 bracket bolts to the frame. It is really that easy?? 2) Has anybody here done a 7.4L swap into a 1500 series chassis? I spoke with the folks at JBA headers and they have Shorty headers especially for a 454SS truck because a 2500 series truck with a 7.4L is different somehow. The JBA tech guy said the 2500 series headers hit the engine mounts on a 454SS trucks. That has me curious what is unique to the 454SS engine mounting. For those that have installed a big block in a GMT400 ½ ton chassis what mount saddles and engine mounts did you use? 3) I plan to use stock exhaust manifolds instead of headers (brand new manifolds can be purchased from Napa for under $100 a piece). I hate headers but I am open to trying a set of shorty headers if we must. Does anybody know where a stock 7.4L exhaust Y-pipe can be purchased? I checked everywhere and it seems Walker and the typical exhaust suppliers are not building service replacement Y-pipes. Of course, an exhaust shop can build one but I would like to have an OEM type Y-pipe. If I go the route of JBA shorty headers they do offer a Y-pipe but that is pricy. FIL is not too concern about the cost of the swap but I have to use some discretion here My in-laws spend half their year in CO and half in FL so I have to have this thing ready to fly by May when they come back. The plan is to start stock piling parts now and do the install sometime in January or February. That should give me plenty of time to work out any bugs before May. When he gets back from FL the truck is going in for paint (going with a sport truck look... painted bumper covers, mirrors, 454SS grill, and new 18" Coys or American Racing Torque Thrust wheels). The project. Just did installed rear drop shackles on it the other day. Looks so much better sitting level! The 7.4L. Using this intake but adding an OEM ’88-’91 7.4L TBI adapter that was used on the old Mark BBC to convert them to TBI. When this engine was in my ’78 K10 Same engine but with a Marine L29 SFI intake. I could never get the MEFI-4 ECM calibrated correctly so I yanked it out and dropped an 8.1L in its place. Problem solved! The Marine L29 intake has been since been sold and this engine has been hanging on an engine stand in the corner of the garage for the past few years just waiting to be swapped into something. I only ran this engine for about 5,000 miles before swapping in the 8.1L Should be a fun project. I can't wait to get started on it!
__________________
Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles
|
12-12-2011, 09:52 PM | #2 |
Registered User
Join Date: Jul 2010
Location: memphis
Posts: 2,537
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
454 5 speed SS clone step side...sound like a cool build.
__________________
1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse |
12-12-2011, 09:57 PM | #3 | |
"Oh well, it's a driver."
Join Date: Jul 2008
Location: Nashville, TN
Posts: 3,467
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Very exciting project...you'll want to hook up with member "TonawandaKid" because I think he's done the 4.3 to 7.4 swap in a 92.
And I've been waiting for a long time to see somebody put 18" coys on one of these trucks...I think they'd look great, even better than 20s!
__________________
- JB - '93 C1500 SHORT/FLEET SILVERADO, 350/4L60E Quote:
Last edited by jb1016; 12-12-2011 at 10:02 PM. |
|
12-14-2011, 12:39 PM | #4 |
Registered User
Join Date: Dec 2008
Location: Williams Lake, BC, CanadÀ
Posts: 179
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
you will need whole new engine mounts, engine and frame side, i believe SBC ones are the same as BBC.
4.3L's use a different mounting system (clam on frame, rubber on motor)
__________________
Josh 1978 RCLB K20, Built 400 SBC, SM465, Lifted 1994 RCSB Silverado, 375HP 350, TH350, 4/6, Toy |
12-14-2011, 09:32 PM | #5 |
Registered User
Join Date: Jan 2010
Location: GREENEVILLE TENNESSEE
Posts: 1,310
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
I had a 90 454SS here with a blown 350 someone put in it...had 2 thrown rods..700R4 ..I bought it..pulled the 350 700r out...put a 454 th400 back in out of a 90 ton.. I then kept the 454SS 14bolt 5lug rear,put a 10 bolt rear in it...off to the auction it went and i trippled my money in the rust bucket..
It was just to make money on..but i cant keep them all...you know.. The stock 350 motor mounts on those are the same as 454 mounts..will bolt right up you will have to lose the stock V6 motor stands..and bolt the mounts to the frame.. But its not to bad to do...headers are pricey..yes but stock 454 truck manifolds work good too... Up grade your trans for sure..while your in there.. |
12-14-2011, 09:34 PM | #6 |
Registered User
Join Date: Jan 2010
Location: GREENEVILLE TENNESSEE
Posts: 1,310
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
I have a set of new "454 SS" bedside decals and the "CHEVROLET " for the tailgate..$60 shipped correct for a 1990 454SS
|
12-16-2011, 01:01 PM | #7 |
Windy Corner of a Dirty Street
Join Date: Jun 2003
Location: Pueblo West, Colorado
Posts: 2,926
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Thanks for the input everybody. I am headed to the junk yard next week to grab the V8 pieces. I’ll take pics of the V6 and V8 mounting for reference in case anybody wants to see that for their projects. I have already started ordering parts for the swap although I probably won’t start on it until late January or February.
70blazerx2, Thanks for the offer on the decals but we’ll pass. The tailgate decal would be nice but since this truck is a sportside the decal will be too big to fit the tailgate. I would be interested in a set of “clean” 454SS wheels if anybody has any lying around.
__________________
Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles
|
12-18-2011, 09:35 AM | #8 |
Registered User
Join Date: Jan 2010
Location: GREENEVILLE TENNESSEE
Posts: 1,310
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
I have this ,perfect for a 454SS clone...and will bolt right in...
http://67-72chevytrucks.com/vboard/s...d.php?t=498908 |
12-18-2011, 12:29 PM | #9 |
Registered User
Join Date: Mar 2008
Location: Powhatan, Va.
Posts: 376
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
I'm looking forward to this build. I looked at your trans swap build thread on your 78. I was really impressed, you do very nice work.
__________________
Sean "If your gonna be dumb, you gotta be tough" 1960 Chevy Impala Sedan - my 25 year search is over!! 1969 C-10 longbed - Nice day DD 1970 Chevy Nova - Street and Strip Project 2002 Acura MDX my DD 2007 Honda Odssey - My Wife's "Mommy Van" |
12-20-2011, 10:10 PM | #10 |
Registered User
Join Date: Jan 2007
Location: Lexington, TN
Posts: 1,427
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Oh my! Very interested in this one Larry. Subscribed!
__________________
The fleet 94 Chevy 4x4 reg cab 2018 Traverse (wifes car) 1977 SWB stepside 1949 Chevy truck |
12-21-2011, 09:39 PM | #11 |
Windy Corner of a Dirty Street
Join Date: Jun 2003
Location: Pueblo West, Colorado
Posts: 2,926
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
The first of many parts for this project arrived today. A nice UPS guy dropped off the OEM GM ’87-’91 big block adapter to mount a TBI unit on a Qjet intake. Yoohoo!
The 454 still in the bag where it has been in for the past few years since the K10 8.1L swap
__________________
Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles
|
12-21-2011, 09:53 PM | #12 |
Windy Corner of a Dirty Street
Join Date: Jun 2003
Location: Pueblo West, Colorado
Posts: 2,926
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Here is a funny photo. This poor little 454 sitting in the back ground on a BFG tire as it was getting replace by an 8.1L back in 2008 (WOW! has it been that long already??). It’s been hanging on an engine stand since then. Hope the valve steam seals haven’t dried up! Glad to finally put it back to use. Nobody puts baby in the corner!
__________________
Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles
Last edited by DirtyLarry; 12-21-2011 at 09:58 PM. |
12-24-2011, 12:25 AM | #13 |
K5Camper
Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Should be a fun build! I'm here to help too...Just as long as I get to row the gears once or twice when it's done! I might have a source on the chrome 454SS wheels too. A friend of mine from high school that hangs out with my Dad is in the middle of a 454SS build. I remember Dad saying he had 2 sets of 5 wheels. I'll ask when I'm up there tomorrow.
I think the 18" coy's would be a sweet choice too. Dad got a set of 15 inchers for his Roadmaster wagon and they are very nice wheels for the money. 18's would still allow for a little more rubber than 20's would too. I like the idea of something that GM should have built too. A 5 speed sportside 454ss is something that SHOULD have been built. Knowing your keen eye for making things look stock but aren't will be pretty cool to see.
__________________
Rob Z. 1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP 1991 K5 8.1L/NV4500/241/D44/14b FWC Camper |
12-24-2011, 08:30 AM | #14 |
Registered User
Join Date: Jun 2008
Location: Lubbock, TX
Posts: 2,047
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
I have a 454TBI, PM me and maybe we can work out a deal.
Are you going to stick with 5-speed or convert it to 4L80E? My guess is you've already figured out you're going to need a new rearend? A 10-bolt with a gov-bomb ain't gonna last long behind a big block. |
12-24-2011, 07:18 PM | #15 |
K5Camper
Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Ok Larry, I'm up here at my Mom and Dad's place and I remembered a poster that might be some inspiration to the project. I remember going to the Denver Auto show back in 10th grade (dating my self here) and seeing the 454SS there. They had a really cool brochure for the full line of 1990 Chevy trucks that folded out into large poster of the 454SS. It just so happens I found it in the basement (along with many other cool Chevy posters I had forgot I had!) and thought that it might go along with what you are doing. I'll bring it over sometime this week. Here's a sneek peek from a crappy cell phone pic:
__________________
Rob Z. 1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP 1991 K5 8.1L/NV4500/241/D44/14b FWC Camper |
12-24-2011, 07:36 PM | #16 | |
Windy Corner of a Dirty Street
Join Date: Jun 2003
Location: Pueblo West, Colorado
Posts: 2,926
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Quote:
__________________
Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles
|
|
12-24-2011, 07:45 PM | #17 | |
Windy Corner of a Dirty Street
Join Date: Jun 2003
Location: Pueblo West, Colorado
Posts: 2,926
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Quote:
__________________
Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles
|
|
12-24-2011, 07:55 PM | #18 | |
K5Camper
Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Quote:
Merry Christmas too! Tell your Mom too. Oh and share some of the toffee with her as well!! Hogging it to yourself is bad karma!
__________________
Rob Z. 1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP 1991 K5 8.1L/NV4500/241/D44/14b FWC Camper |
|
12-24-2011, 08:11 PM | #19 |
Windy Corner of a Dirty Street
Join Date: Jun 2003
Location: Pueblo West, Colorado
Posts: 2,926
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
What toffee? You didn't leave any toffee here
__________________
Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles
|
12-25-2011, 12:28 PM | #20 | |
Registered User
Join Date: Jan 2010
Location: GREENEVILLE TENNESSEE
Posts: 1,310
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Quote:
I wont have it long once someone see's it..,Hard to find..limited produced..I have it on CL and soon it will go on ebay... Get a posi unit out of a 91-96 caprice or roadmaster...90% of wagons had posi...the spid lable in inside the tailgate on the right side. G80 is posi.. They are the old clutch type and will bolt right in. You need 2 wheels pulling that BB |
|
12-25-2011, 04:27 PM | #21 | |
Windy Corner of a Dirty Street
Join Date: Jun 2003
Location: Pueblo West, Colorado
Posts: 2,926
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Quote:
Again, thanks but no thanks. I am not concerned about the little 8.5 10 bolt axle with him driving it, especially as light as the truck is and the fact it never tows anything. If I come across a 5 lug 9.5” axle for a lot less than $600 and not 1,500 miles away I’ll think about it. The 5 lug 9.5" axles also came in many ½ ton 2wd long bed extended cab trucks of that era. So they are not just limited to 454SS trucks. That said, they are not that rare around here but certainly not as easy to find as a 14 bolt full floater.
__________________
Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles
|
|
12-25-2011, 08:14 PM | #22 | |
Registered User
Join Date: Jun 2008
Location: Lubbock, TX
Posts: 2,047
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Quote:
Head to the 454SS site with TBI questions, those guys have pretty much got it figured out and they're a helpful bunch. 70Blazer, are you sure about the clutch posi's in Roadmasters and Caprices? I need a posi for my '97 Tahoe that now has a one tire fryer, I don't really want a locker and won't waste my time installing a gov-bomb in this 10-bolt rearend. |
|
12-26-2011, 01:56 AM | #23 | |
Windy Corner of a Dirty Street
Join Date: Jun 2003
Location: Pueblo West, Colorado
Posts: 2,926
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Quote:
Hmm, maybe my memory is fading me on this one. Maybe it is ½ 4x4 long bed extended cabs that I am thinking of that came with the 9.5” axle. Of course that would mean 6 lug not 5. I’ve been wrong before. None the less, I am not worried about the rear axle. I know the GM Corp 8.5” is a turd but my experience with the Corp 9.5” isn’t much better. I haven’t messed with many 2wd’s as toys but I spun wrenches on Federal Express (that was before they changed their brand name to FedEx) Chevrolet G30 vans to get through college back in the mid-90's. Our small FX station we had about 14 ‘90 model year G-vans vans powered by 4.3L engines backed by 700R4 transmissions and 8 lug 9.5” rear axle and they were famous for axle seal leaks, pinion seal leaks, pinion bearing failures, axle noise and the center pin falling out chucking the pin against the axle housing and locking up the axle when the little center pin lock screw broke. Then there were all of the brake pulsations with that axle due to excessive runout at the axle flange causing the brake drum to wobble around the shoes. I’ve never been a fan of that axle anyway. I am tired of hearing about 9.5” axles in THIS TREAD! I’d rather take my chances with an 8.5” than throw money at a “RARE” POS 5 lug 9.5” axle. I hate anything Ford but the FedEx E250’s vans with 4.9L I6 engines and C6 transmissions of the same generation with the semi float Dana 60’s never had any rear axle issues other than lug nut studs spinning in the axle flange. That all said, if the GM 8.5” has a major catastrophic failure in this here 454SS clone project I’d rather toss custom 5-lug Moser axles in a Ford semi float Dana 60 than mess with a GM corporate 9.5” axle unless I stumble across a 5 lug 9.5” at the bone yard for almost free. Dodge used the semi-float Dana 60 in trucks and vans as well. There are options other than the GM 9.5”. The 454SS crowd can keep their 9.5" all they want and demand whatever they want for that axle. I'm not buying into it. A little TBI 7.4L isn't that huge of a power house engine monster anyway. Everybody said the front Dana 44 in my K10 with the 8.1L wouldn’t live either. I’ve wheeled the hell out of it for a few years around AZ, CO and UT with a conservative 425 HP/600ish lb ft torque estimate 8.1L without issue (a heck of a lot more power than a TBI 7.4L can generate). Guess it is how ginger you are with the loud pedal.
__________________
Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles
Last edited by DirtyLarry; 12-26-2011 at 02:43 AM. |
|
12-26-2011, 02:27 PM | #24 | |
Registered User
Join Date: Jan 2010
Location: GREENEVILLE TENNESSEE
Posts: 1,310
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=411027 Larry..i was not trying to push you to buy the rear i have,sorry.. ..I know you are 1500+ miles away... I just figured that building a truck...you may need it..I would like to take a raod trip out west one day...I have never been past nashville..on the west side to the salvage auction.. I know its hard to find,thats why i pulled it out,put a 10bolt back in the 90 454SS before it went back to the salvage auction..truck was rusted out..I got it running and trippled my money on it.. I have to many projects right now anyway... |
|
12-27-2011, 01:55 AM | #25 |
K5Camper
Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
|
Re: 1993 C1500 project: 4.3L to 7.4L swap > 454SS clone
Since it's not a true 454ss for 600 bucks you could build 9" ford axle and have 2-3 times the beef of a 8.5 or 9.5 corporate axle.
That being said, between the light weight lack of traction the 8.5 can survive. Guys building V8 S10's go hunting for the 8.5 because it was the biggest factory axle put in them. Yes the S10 is lighter, but some of these guys are running full tilt gen 3 6.0L's without a problem. Hell, 93-02 F-bodies with LT1 and LS1's ran the cheesy 7.5" 10 bolt and they survived in stock form. The problem came in when guys added sticky drag radials or slicks and other traction devices to hook them up. I can say this, stock 454ss's didn't hook up that well out of the box and neither will this one. I did a lot of drag racing back in high school and had a couple of spoiled buddy's that their parents bought them 454ss's. Neither one hooked up well out of the hole. They both struggled to break into the 15 second zone at Bandimere speedway's 5800 feet altitude. Axle survival matters just as much with how you drive it in addition too the type of axle it is.
__________________
Rob Z. 1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP 1991 K5 8.1L/NV4500/241/D44/14b FWC Camper |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|