Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
08-01-2011, 10:57 PM | #1 |
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
1997 K10 gear ratio code??
A friend of mine needs a rear end for his 1997 K10. Other than spinning the tires and counting is there a code some where on the axle itself that will tell me what ratio it is? If so, where is it located? The code sticker is still in the glove box if that helps. thanks
__________________
Alan
Philippians 2:14-16 |
08-02-2011, 09:44 AM | #2 |
Registered User
Join Date: May 2004
Location: Minnesota
Posts: 4,621
|
Re: 1997 K10 gear ratio code??
Look at the “RPO” codes on the sticker in the glove box.
Axle ratio by RPO code GU2 = 2.73 GU4 = 3.08 GU5 = 3.23 GU6 = 3.42 GT4 = 3.73 GT5 = 4.10 G80 = Eaton Gov-Loc limited slip unit
__________________
For those of you that are wondering why you are not getting replies to your thread: Did you give the model, year, engine, fuel system type, and transmission information? If it is modified from what came stock from the factory, let us know that too. |
08-02-2011, 11:20 PM | #3 |
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: 1997 K10 gear ratio code??
Thanks for the great info. I looked and it is GU6.
__________________
Alan
Philippians 2:14-16 |
08-03-2011, 09:17 PM | #4 |
Registered User
Join Date: May 2004
Location: Minnesota
Posts: 4,621
|
Re: 1997 K10 gear ratio code??
You're welcome!
__________________
For those of you that are wondering why you are not getting replies to your thread: Did you give the model, year, engine, fuel system type, and transmission information? If it is modified from what came stock from the factory, let us know that too. |
Bookmarks |
|
|