05-03-2018, 06:22 PM | #1 |
Registered User
Join Date: Sep 2015
Location: Lake Placid florida
Posts: 599
|
Alternator question
I know this has been covered, and I've done searches, but I've found conflicting information, and different ways of doing it.
So I have to ask, as I'm afraid I will mess it up. 1967 c10. Factory setup - external regulator - factory ammeter (and I want to keep it working). I want to go to the one wire setup. After looking over some threads, I have some questions. What year and vehicle alternator should I buy? I've seen different answers. I want to reuse my original brackets. I don't want an alternator with a serpentine pulley or one mounted on the rear. And I saw something about fin direction. Do I need to add a resistor? If so, where and which? Do I need to change any fuses (amperage). Is there a thread with pics? I do much better with pics than diagrams. I found one, and was all set to go, but then Vette said something like it's not the best way. I was hoping to find one in the FAQ, but did not see it. I've also seen terms like 10SI, 12 SI, CS series, etc. I don't know what this means? Also seen info that 3 wire is better? I just want a simple set up, does not have to be the latest and greatest. I would be happy with a good link, not asking for the whole thing to be restated. thanx Last edited by dave`12; 05-03-2018 at 06:38 PM. |
Bookmarks |
|
|