![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Sep 2017
Location: Callaway
Posts: 10
|
Ignition Switch indexing off
Replacing the ignition switch and cylinder lock on my 64. I bought both from Napa (Echlin) and everything works fine. The key, however, is not in straight up/down position as the original due to the indexing of the switch in the dash. Has anyone else ran into this issue? Does the Counterpart switch have the proper indexing?
|
![]() |
![]() |
![]() |
#2 | |
Registered User
Join Date: Feb 2009
Location: southeasternfoothillsofusa
Posts: 1,557
|
![]() Quote:
Tell us what function is not straight up and down, Acc,, Lock, Off, On, or Start?. Sounds like you do not have the switch/bezel aligned properly. I'd check that before I began grinding... HTH, Sam |
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2017
Location: Callaway
Posts: 10
|
Re: Ignition Switch indexing off
I was thrown off because my original switch did not have ACC position. It works fine.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|