Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
04-09-2010, 02:09 AM | #1 |
Registered User
Join Date: Jan 2010
Location: Summerville, SC
Posts: 14
|
converting to serpentine
I have a 1982 chevy c10 with a later model 350 from casting # block made for 69-79 need to know what kind of vehicle do I need to look for if I want to convert my v belt to a serpentine set up. Want to go down do the junk yard and find me a set up for my truck
|
04-09-2010, 05:50 AM | #2 |
yes, i do
Join Date: Jun 2007
Location: Spokane, wa
Posts: 2,734
|
Re: converting to serpentine
just about any truck from 88-98 with a 4.3 through 350 and i believe even the bbc trucks will work. just make sure you get the water pump when you grab everything else. i'm not so sure about the bbc set up but the 43. through 350 setup will work just fine. you could prolly get it cheaper if you found a 4.3 with the whole setup since most people tend to over look those.
__________________
ERROR 404....... SNAPPY COMEBACK NOT FOUND _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900 |
Bookmarks |
|
|