|
09-30-2011, 04:02 PM | #1 |
Registered User
Join Date: Aug 2011
Location: Six-Mile, SC
Posts: 153
|
sm420 question
does anybody know what the bearing retainer size is? i'm doing a t5 swap and trying to determine what sizes i'll need to have my plate made or if i can buy a premade one from vintage metal works.
i know it's a pre 67 sm420 because it doesn't have a spot for a reverse light switch, but i'm concerned because it's in a 71 c10. As far as i know all 67 down bellhousing had the 4.686 bellhousing hole(or something like that) i'm THINKING the PO had changed it all out because the transmission doesn't wander in the bellhousing and it doesn't have an index ring. if i had it apart it wouldn't be a big deal but this is my DD so i can't just tear it apart to look. ANY info would be pure awesome i know you guys know the answer haha
__________________
Six in a row makes it go |
09-30-2011, 04:09 PM | #2 |
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Re: sm420 question
I think your answer can be found here. http://www.novak-adapt.com/knowledge/sm420.htm
__________________
Fred There is no such thing as too much cam...just not enough engine. |
09-30-2011, 04:35 PM | #3 |
Registered User
Join Date: Aug 2011
Location: Six-Mile, SC
Posts: 153
|
Re: sm420 question
AWESOME! thank you i've seen that article before but i couldn't find it again. looks like i'm good to go and get the adapter made or bought!
__________________
Six in a row makes it go |
Bookmarks |
|
|