CO Restored 67 gauge cluster and glove box set - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Curtb1971** · 03-04-2018, 09:05 PM

Up for grabs is a restored 1967 only 7-hole cluster and glove box door package. Gauging if the is a interest for others as well on these. Here's the details of the work done using all oem parts
Cluster
-Tin's bead blasted and painted
-Gauges cleaned and needles painted
-Lens polished
-Gauges and lights tested for proper function
-67' only bezel restored and painted to OEM colors
-Speedo set to 6.7 miles
-oem hardware acid cleaned, painted and new stainless hardware for circuit board.
Glove box door
-Professionally dip stripped to bare metal, sealed, primed and painted to match the gauge cluster
-oem hardware acid cleaned and painted
-Latch polished to shine and greased
-Hinge and 67' only stop bead blasted and painted (also have 68+ stops with the rubber bumper if wanted)

$500 shipped/insured conus

Also can build this cluster with an oem V8 tach for an additional $200

Let me know any questions
Thanks, Curt

**Curtb1971** · 03-04-2018, 09:13 PM

Cluster pics

**Curtb1971** · 03-04-2018, 09:19 PM

Glove box door pic

nds1968 · 03-04-2018, 09:41 PM

Very nice, I'll have to keep you in mind...

countr · 03-04-2018, 10:02 PM

Curt, that is sweet!!!!! I can not wait to see the one you did for my 67 4x4!

Russ

**Curtb1971** · 03-04-2018, 10:10 PM

Quote:

Originally Posted by nds1968

Very nice, I'll have to keep you in mind...

Thanks man

Quote:

Originally Posted by countr

Curt, that is sweet!!!!! I can not wait to see the one you did for my 67 4x4!

Russ

Thanks Russ, got yours and a glove box door tucked away in your stash!

**jocko** · 03-04-2018, 10:32 PM

Good luck on your sale - that is a beautiful combo that you don't see restored very often.

**Njeiv** · 03-04-2018, 10:33 PM

I’ll take it

**Curtb1971** · 03-04-2018, 10:55 PM

Quote:

Originally Posted by Njeiv

I’ll take it

PM with payment info sent for the setup with an oem V8 tach and 80lbs oil gauge. I'll post up some pics when I get it done this week. Thanks, Curt

**Curtb1971** · 03-04-2018, 11:03 PM

Quote:

Originally Posted by jocko

Good luck on your sale - that is a beautiful combo that you don't see restored very often.

Thanks Jocko

I figured I'd better do glove box doors to match the clusters I've been restoring for the 67 guys.

dec010974 · 03-05-2018, 08:10 AM

Is this a weld on part or can this unit be bolted on? I Didn't know that dash, glove box cap comes off. I may be Interested in one of these later on in my build.

**Curtb1971** · 03-05-2018, 08:53 AM

Quote:

Originally Posted by dec010974

Is this a weld on part or can this unit be bolted on? I Didn't know that dash, glove box cap comes off. I may be Interested in one of these later on in my build.

If your talking about the dash assembly (yellow part) then this part is spot welded at the lower half of the windshield and also bolted at the A pillars. I used this just to take pictures for the gauge cluster and glove box door but never intended it to be part of the sale. All the other components are bolt on. Hope that answered your question

**Rods** · 03-05-2018, 10:02 PM

Hey Curt do you have anymore of these available ?

35boulder · 03-06-2018, 08:20 AM

Nice looking combo. Nice work.

**Curtb1971** · 03-06-2018, 11:02 AM

Quote:

Originally Posted by Rods

Hey Curt do you have anymore of these available ?

Rod, I have a (2) extra glove box doors completed with the run I did and an assortment of 3 & 7 hole 67 bezels that need completed to make a cluster set. Can build pretty much any variation of a cluster

Quote:

Originally Posted by 35boulder

Nice looking combo. Nice work.

Thanks man, these are a blast fixing up

projectking · 03-06-2018, 11:21 AM

How much to restore if I sent you the cluster and door? I want to retain the original SPID.

**Curtb1971** · 03-06-2018, 11:39 AM

Quote:

Originally Posted by projectking

How much to restore if I sent you the cluster and door? I want to retain the original SPID.

You know this question has come up before and it would be risky for the both of us as in the shipping process. I wouldn't want your original spid being lost in the mail going to or from. Clusters and parts are replaceable but OE spids arent. It's do able as far as the work but there is that risk involved. I've done a couple of these where guys just retain their original door and use the ones I provided in their truck.

**Rods** · 03-06-2018, 06:23 PM

Curt I’m in for two 7 hole with tach and the glove box doors.....

**Curtb1971** · 03-07-2018, 01:13 AM

Quote:

Originally Posted by Rods

Curt I’m in for two 7 hole with tach and the glove box doors.....

I'm completing the one for Njeiv soon then I'll start working on other bezels I have and will keep you posted. Pm sent Thanks, Curt

projectking · 03-07-2018, 04:27 PM

Quote:

Originally Posted by Curtb1971

You know this question has come up before and it would be risky for the both of us as in the shipping process. I wouldn't want your original spid being lost in the mail going to or from. Clusters and parts are replaceable but OE spids arent. It's do able as far as the work but there is that risk involved. I've done a couple of these where guys just retain their original door and use the ones I provided in their truck.

Pm sent

**Curtb1971** · 03-18-2018, 10:18 PM

Ok Njeiv, got the 4x4 stickers for your door and placed in the original location thanks to member countr for sending me his original glove box door

67' tach cluster with 80lbs oil gauge is completed. I'll test/calibrate the tach tomorrow then it will be headed your way. Thanks, Curt

philB · 04-11-2018, 10:57 AM

the tach to use with HEI dist. is differant or can that be added to 7 gauge cluster.

**Njeiv** · 03-19-2018, 04:30 AM

Lookin great! Thanks for the update, can hardly wait to receive it.

arcticman · 04-11-2018, 10:23 PM

I would be interested in a set for my 67 GMC k1500 I have a good glove box door all my gauges work but PO overtightened the screws on the bezel. can you repair that? no missing pieces just cracked.

PROJECTKING asked how much if parts were sent ?

I have a GMC and they did not use SPID label in 1967 so that's not an issue.
they look nice.
what is your turn around time not inc. shipping?
Thanks,

**Curtb1971** · 04-11-2018, 10:38 PM

Quote:

Originally Posted by arcticman

I would be interested in a set for my 67 GMC k1500 I have a good glove box door all my gauges work but PO overtightened the screws on the bezel. can you repair that? no missing pieces just cracked.

PROJECTKING asked how much if parts were sent ?

I have a GMC and they did not use SPID label in 1967 so that's not an issue.
they look nice.
what is your turn around time not inc. shipping?
Thanks,

Arcticman, time and cost would all depend on the condition of the parts you have. The screw hole cracks are typical on these. I can repair them and reinforce the bezel in the process to prevent future cracks. I'll send a pm with my contact info to send some pictures and we can go from there. Thanks, Curt

03-04-2018, 09:05 PM	#1
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Restored 67 gauge cluster and glove box set Up for grabs is a restored 1967 only 7-hole cluster and glove box door package. Gauging if the is a interest for others as well on these. Here's the details of the work done using all oem parts Cluster -Tin's bead blasted and painted -Gauges cleaned and needles painted -Lens polished -Gauges and lights tested for proper function -67' only bezel restored and painted to OEM colors -Speedo set to 6.7 miles -oem hardware acid cleaned, painted and new stainless hardware for circuit board. Glove box door -Professionally dip stripped to bare metal, sealed, primed and painted to match the gauge cluster -oem hardware acid cleaned and painted -Latch polished to shine and greased -Hinge and 67' only stop bead blasted and painted (also have 68+ stops with the rubber bumper if wanted) $500 shipped/insured conus Also can build this cluster with an oem V8 tach for an additional $200 Let me know any questions Thanks, Curt Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

03-04-2018, 09:13 PM	#2
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: Restored 67 gauge cluster and glove box set Cluster pics Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

03-04-2018, 09:19 PM	#3
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: Restored 67 gauge cluster and glove box set Glove box door pic Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

03-04-2018, 09:41 PM	#4
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: Restored 67 gauge cluster and glove box set Very nice, I'll have to keep you in mind... __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

03-04-2018, 10:02 PM	#5
countr Registered User Join Date: Dec 2015 Location: Russell, Iowa Posts: 2,007	Re: Restored 67 gauge cluster and glove box set Curt, that is sweet!!!!! I can not wait to see the one you did for my 67 4x4! Russ

03-04-2018, 10:32 PM	#7
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,939	Re: Restored 67 gauge cluster and glove box set Good luck on your sale - that is a beautiful combo that you don't see restored very often.

03-04-2018, 10:33 PM	#8
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 517	Re: Restored 67 gauge cluster and glove box set I’ll take it

03-05-2018, 08:10 AM	#11
dec010974 Registered User Join Date: Oct 2012 Location: Miami, Florida Posts: 915	Re: Restored 67 gauge cluster and glove box set Is this a weld on part or can this unit be bolted on? I Didn't know that dash, glove box cap comes off. I may be Interested in one of these later on in my build.

03-05-2018, 10:02 PM	#13
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,477	Re: Restored 67 gauge cluster and glove box set Hey Curt do you have anymore of these available ?

03-06-2018, 08:20 AM	#14
35boulder Registered User Join Date: Oct 2015 Location: Dallas Texas Posts: 1,380	Re: Restored 67 gauge cluster and glove box set Nice looking combo. Nice work.

03-06-2018, 11:21 AM	#16
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Restored 67 gauge cluster and glove box set How much to restore if I sent you the cluster and door? I want to retain the original SPID. __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

03-06-2018, 06:23 PM	#18
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,477	Re: Restored 67 gauge cluster and glove box set Curt I’m in for two 7 hole with tach and the glove box doors.....

03-18-2018, 10:18 PM	#21
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: Restored 67 gauge cluster and glove box set Ok Njeiv, got the 4x4 stickers for your door and placed in the original location thanks to member countr for sending me his original glove box door 67' tach cluster with 80lbs oil gauge is completed. I'll test/calibrate the tach tomorrow then it will be headed your way. Thanks, Curt Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

04-11-2018, 10:57 AM	#22
philB Registered User Join Date: Oct 2012 Location: new orleans, la. Posts: 217	Re: Restored 67 gauge cluster and glove box set the tach to use with HEI dist. is differant or can that be added to 7 gauge cluster.

03-19-2018, 04:30 AM	#23
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 517	Re: Restored 67 gauge cluster and glove box set Lookin great! Thanks for the update, can hardly wait to receive it.



Register or Log In To remove these advertisements.

04-11-2018, 10:23 PM	#24
arcticman Registered User Join Date: Feb 2018 Location: ANCHORAGE Posts: 135	Re: Restored 67 gauge cluster and glove box set I would be interested in a set for my 67 GMC k1500 I have a good glove box door all my gauges work but PO overtightened the screws on the bezel. can you repair that? no missing pieces just cracked. PROJECTKING asked how much if parts were sent ? I have a GMC and they did not use SPID label in 1967 so that's not an issue. they look nice. what is your turn around time not inc. shipping? Thanks,

Register or Log In To remove these advertisements.