04-26-2011, 09:05 PM | #1 |
Registered User
Join Date: Jan 2011
Location: Manistee, Mi
Posts: 112
|
Carb Issues
I got a mild built chevy 350 with a 600cfm Edelbrock Carb. The engines pushing 325hp and with that carb it shouldn't be too much. I'm getting a rich issue at idle. The carbs loading up and then dogging out if i stomp it off idle. I've somewhat corrected my problem but it still exist. I bumped my timing advance to 40 and left it there. The truck picks up alot better now but I was wondering how to really tune in my Idle Mixture Screws. I want to lean it out a little at idle. I only got 32's on my truck and i should be able to roast them off if my truck didn't dog off the line. I checked for vacuum leaks and that was fine. My plugs were black carbon composite so I know i was running rich. I'm gonna check my plugs in a few days after running with the timing advanced to 40 and see if they clean off any. So please help me on the Idle Mixture Screw deal, if thats my issue? Help!
|
04-26-2011, 09:21 PM | #2 |
Registered User
Join Date: Mar 2010
Location: Red Bud, IL (Home) Newton, IL (Shop)
Posts: 301
|
Re: Carb Issues
As far as idle mixture goes, if you have your timing set and are running at operating temp, what I usually do is shut the engine off and turn both mixture screws all the way in, just stop when you get there don't force them. Then back them both out 3.5 turns. Start then engine then turn them out each a half a turn until you get the highest idle speed. once you have found that, turn them in one turn. After that you should be able to set your base idle speed where you want it.
Also a possibility based on what your saying, is your float level set too high? |
04-28-2011, 01:03 AM | #3 | |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: Carb Issues
Quote:
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
Bookmarks |
|
|