My Build Thread (year+) on 71 Jimmy 4x4

[RckyMntnKng]

I found a hose/cable supply shop in town. "Andys Supply".
They do about every kind of hose from 5000psi pressure washing right down to the teflon braided stainless steel.
They recommended going with rubber hose, and I like that look better.

I took my original crap in there, and they took the measurements plus added 6" for the length for the lift, and made all new with the correct ends and fittings.

It took them about 15 minutes, and was $30 per side. Even got new banjo bolts.

I bought like 4' of extra tube and replaced the vent lines on both axles as well.

Monday I will take the rear 14bff lines to them and get that done.