![]() |
![]() |
#1 |
Registered User
Join Date: Mar 2012
Location: Hooper Ut
Posts: 466
|
My own build thread
Well, I've been lurking for a long time around here and I figured I'd share my build with everyone. I first planned on just doing a few "minor" things to it and of course I've turned it into a huge project now... My wife is so excited! haha
![]() Anyway here we go! I can't seem to find all my pictures so I will condense this down a lot, I started out with a fairly rough long bed and decided to make it a short bed. Here is the frame where I shortened it ![]() Here it is welded together ![]() Bed layout ![]() Me cutting the bed, this is the best part for me ![]() ![]() Here is the bed welded back together ![]() Here is the rusty floors I'm replacing ![]() I wish I would have researched the rockers better because the LMC rockers didn't have the door jam area's so I had to hand make them.... took me forever! ![]() Here is the new rocker and floor installed ![]() I made the lower half of this door... I should have just bought a new skin because this sucked... ![]() This is after I finished welding everything ![]() The paint was horrible so I've been stripping it all off, man did this make a mess of my garage... ![]() Here is the drivers side floor I'm working on right now, all the floor braces need to be remade also because they are almost totally gone ![]() ![]() This is where I'm currently at, hopefully I will finish the whole floor this weekend if everything goes ok. ![]() Once I finish the floors and finish stripping all the paint off then I'm pulling the motor and trans so I can start bagging it. I've never bagged anything before so I hope it turns out ok, if not then I'll have a really clean pile of crap I guess ![]() Anyway, this is a really cool site with lots of good info. Hope everyone likes my build. I hope I can get this thing on the road within the next 2-3 months. That's going to be pushing it but I need a vehicle so I can give my car to my daughter. |
![]() |
![]() |
Bookmarks |
|
|