1971 2wd Chevy blazer build

[2wdChevyblazer]

Hello Everyone on 67-72 chevytrucks
So I was able to get a real 2wd chevy blazer
Its a 1971

So this is my plan. Tear it all down and start fresh.
Meaning remove all the old paint, body seal, Rust etc

And I have no plans at all to modify the body in any way other than remove the quarter panel marker lights. But I could also leave them. not a real big issue for me.
Oh yes I dont like the rain gutters. So I will be removing them.

Sorry for any typos

And Im open to any ideas any of you may have or suggestions. And if you need me to take a picture to help you in any way just ask me. Give me a couple of days.

So I tore it all down to get it ready for sandblasting.
Both driver and passenger side rockers were rusty.

I also noticed the windshield top header bow was rusty...I drilled out the spot welds and opened it up and yes it was pretty rusty inside.

So I sent that to get sand blasted as well

What I plan on doing to it is this
20s up front
22s in the back<----- front and rear can change as far as size. This is one of the many areas I may be asking for input from all of you...I dont want to modify the body at all

I guess I should stop talking and upload photo's