Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-10-2018, 02:19 PM | #1 |
Registered User
Join Date: Jul 2017
Location: Lebanon, Oregon
Posts: 241
|
Clutch & Basic Hydraulics
I am working on the clutch on my 1953 3100 w/ 5.3 & Muncie M20. I having some issues with the clutch pedal and would like some thoughts, if possible.
I am using a Howe hydraulic throughout bearing with stock LS/Chevy pressure plate/clutch, Wilwood pedal/master combo w/ .75 bore, 1:7 ratio pedal. My issue is the pedal motion distance. To get the clutch to completely disengage, the pedal has to be very high, ~3". The pedal hits the ~45 degree firewall before it would if it was a 90 degree, I assume this was designed for. I now own the combo after installing it so using it or some of it would be best if possible, I need to keeps cost to a minimum if possible. My initial though was to somehow reduce the pedal travel, but this may reduce usability. My thoughts were: 1. Change the pedal ratio - making or modifying some pedal assembly. Cons - can't mod current pedal, will change effort & other factors; pro - challenge to build and can make changes during build, flexibility? 2. Change the master cylinder bore size. Cons - can't use what I have, unknown "side effects"; pros - with bigger bore = less pedal motion/more release bearing motion/less bearing force (?? still reading up on this) 3. Create a recess in the firewall to allow for some of the needed motion. cons - might look odd; pros can use all current stuff & easy to create Does anyone have any suggestions or thoughts?
__________________
It was said that if you cut off one hydra head, two more grow back. -Lernaean Hydra Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=743246 |
Bookmarks |
|
|