Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-08-2018, 11:37 AM | #23 | |
Registered User
Join Date: Mar 2008
Location: Eugene Oregon
Posts: 121
|
Re: "Phantom" Parasitic Draw.
Quote:
I took the meter out and hooked the battery back up. Was checking it from time to time during the day, nothing, no draw. Then it happened, the battery was pulled down and she would not start, pulled the battery cable off and the clip on the meter came off and lost power to the system, hooked it back up and no draw.....I missed it. So, that won't happen again. Radio was replaced and now on its own power switch. No power seats but does have the power door locks and Yes, several years ago, found one that would stick. I was lucky and was able to find some NOS switches to replace them as they are hot all the time. I have replaced and checked both the key switch and switch on the steering column under the dash. Check and set the adjustment rod. I did Not test the Alt to see if turns into a magnet, just disconnected it, several times. I did not pull all the fuses, just several at a time and no on the tin breakers. I was hoping to find the draw happening and start pulling. I have the Fluke 62 Max + IR Thermometer which is pretty accurate but have not used it on the wiring, good idea, if I get it to start drawing. This is the second computer since this problem has started. Last time I sent it to the fellow back east and had it rebuilt and tested. The main harness for the engine compartment, I have not removed. If I can just Catch it Drawing, I have a better chance on finding it of course. I have the hood light both door light switch's disabled so opening them to start testing and not cause any more draw. |
|
Bookmarks |
|
|