Eaton HO72/HO52 vs. 14 Bolt FF

[Tdbengry]

Originally Posted by Getter-Done

Yes .Hold the Pinion still. Then move the carrier back and forth. There should be about (0.010 to 0.030") best I remember.
The Pinion housing was removed thou(right).
If so this could change things.

Pinion depth and the ring gear pressure against the ring go hand in hand.
Maybe you got lucky and the pinion is put back just like it came out.

I'm thinking I lucked out. Here is a video, sorry for the shaking not the best camera man.
https://youtu.be/0KWjT_56X3M