![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Feb 2012
Location: Overland Park, KS
Posts: 14
|
Need Help Verifing Quadrajet Vacuum Lines / Ports
I have a 1969 K10 with 350 V8 w/Quadrajet carburetor, 4 speed manual, PS and PB. Truck was built in Janesville. The stampings on the carburetor body are: 7045583 YZ 1276. I believe the carburetor decodes as follows: 4MV, 1975, California only.
I can’t find a vacuum diagram for the truck. And even if I did, because the carburetor is not original to the truck I couldn’t determine if everything is hooked up correctly. So, I need help determining what all of the vacuum lines are for and that they are connected to the correct ports. I have included several photographs that have the lines / ports numbered. #1a / 1b: Distributor vacuum advance line. Is 1b connected to the correct port? Should it be connected to a ported or direct vacuum source? #2: ? #3a / 3b: ? #4: ? #5a / 5b: PCV line. Is 5b connected to the correct port? #6: ? #7: Brake booster vacuum line. Is 7 connected to the correct port? Thank you in advance. Last edited by shiftinggears; 01-05-2019 at 09:45 PM. |
![]() |
![]() |
Bookmarks |
|
|