The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-31-2020, 10:24 AM   #1
71K1500
Registered User
 
Join Date: Sep 2019
Location: Lockport, MB
Posts: 24
70 GMC steering questions

Hi guys.
Dont usually post but have questions about my kids 70 1/2 ton.
Its a dailly driver and the steering makes me crazy. It wont return to centre. The box and drag link ends have been replaced. New tires, wheel bearings etc. Had dlignment done. All looks good.
We replaced the box to remove the slop. The new box is nice and tight.Almost too tight. Im beginning to wonder if it wasnt set correctly after the rebuuld.
Also, should the drag link be parallel to the ground or is a slight angle ok? The suspension seems to be a bit higher than stock. 4 leaves on the front. Im going from memory from when I had a 72 GMC and seem to remember the front having 2 or 3 leaves and a slight upward or negative arch. His have a bit of positive arch.
Sorry for the long post but Im starting to pull out what little hair I habe ha ha.
Any suggestions on what else to check?
Thanks
Jeff

Last edited by 71K1500; 07-31-2020 at 10:30 AM.
71K1500 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:18 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com