Swapping axle parts question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Johnl48** · 10-13-2021, 07:23 PM

I talked to a truck parts Company regarding what I needed to convert my current front axle dana 44 from drum to disc brakes. He said new knuckles, new spindles and new outer axle shafts. (Inner shafts will work) cost $1,600.00
I recently found this near me so my question is can I pull those parts from this and put them on my Axle ? I replaced seals, sandblasted and painted my axle and it is bolted up to the frame already so I don't want to swap ii if I don't have to

My truck
1970 k20 4x4 3/4 ton 8 lug. Has a 10 bolt dana 44 with 4.09 gears

10-13-2021, 07:23 PM	#1
Johnl48 Senior Member Join Date: Jun 2021 Location: West milford nj Posts: 324	Swapping axle parts question I talked to a truck parts Company regarding what I needed to convert my current front axle dana 44 from drum to disc brakes. He said new knuckles, new spindles and new outer axle shafts. (Inner shafts will work) cost $1,600.00 I recently found this near me so my question is can I pull those parts from this and put them on my Axle ? I replaced seals, sandblasted and painted my axle and it is bolted up to the frame already so I don't want to swap ii if I don't have to My truck 1970 k20 4x4 3/4 ton 8 lug. Has a 10 bolt dana 44 with 4.09 gears



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.