02-14-2018, 03:50 PM | #26 |
Registered User
Join Date: Apr 2011
Location: .
Posts: 3,104
|
Re: Door Skin Feedback
Yup, after market parts usually need some persuasion to fit correctly.
Original needs a good kick sometimes too. |
03-02-2018, 05:20 PM | #27 |
Registered User
Join Date: Jan 2010
Location: Regina, SK
Posts: 804
|
Re: Door Skin Feedback
Figured I’d follow up on this if anybody is searching for a good door skin. As expected, the TriPlus skin was equally bad as the Counterpart. The body lines were off by about 3/8” and I’m not even sure how folks use the complete skin successfully. I ended up doing the PS same as the DS, cutting between the body lines and basically tossing the top bit in the bin. Not exactly ideal when you’re paying $200CDN for a chunk of sheet metal.
Here’s a couple pics of how it turned out. Will still need some work, one side and the bottom need to be welded for gaps still. I tacked a piece of angle iron to it before cutting to minimize panel distortion, it seemed to work pretty good. |
03-02-2018, 07:52 PM | #28 |
Registered User
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
|
Re: Door Skin Feedback
That's when we would refer to aftermarket parts at the shop as "similar."
Brian
__________________
1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings" |
03-02-2018, 09:09 PM | #29 |
Registered User
Join Date: Jan 2010
Location: Regina, SK
Posts: 804
|
Re: Door Skin Feedback
|
03-03-2018, 03:24 PM | #30 |
Registered User
Join Date: Apr 2011
Location: .
Posts: 3,104
|
Re: Door Skin Feedback
Glad you stuck with it. You made it line up straight.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|