3 parts need identification + 1 question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72 longhorn BB · 11-14-2005, 07:47 PM

Hey there folks,
#1.) My memory is challenged and I cant remember what the silver thing is. Can you help?

#2.) Where can I buy new hose clamps like this?

#3.) Where can I get a new connector plug for engine temp sensor like this?

#4.) Which side of a big block gets the temperature sensor? Driver?

Thanks ahead of time, and if you cant ansewe all of them please send TTT.

**Stocker** · 11-14-2005, 07:57 PM

#1 is a spark plug wire heat shield... can't help on the others but here's a bump..

demi · 11-14-2005, 08:30 PM

#1

although it appears to be for a small block.

#2 and #3 you can buy through a supplier that sells camaro or chevelle parts. Classic industries has them as well. You will also need to get the heat insulation for the green temp wire. This usually comes in a repair kit.

#4 driver

72 longhorn BB · 11-14-2005, 09:03 PM

Thanks, I'll check out classic ind. I can't imagine where the SB spark plugh wire heat shield came from though.

Thanks again.

11-14-2005, 07:47 PM	#1
72 longhorn BB Registered User Join Date: Jan 2000 Location: Michigan Posts: 312	3 parts need identification + 1 question Hey there folks, #1.) My memory is challenged and I cant remember what the silver thing is. Can you help? #2.) Where can I buy new hose clamps like this? #3.) Where can I get a new connector plug for engine temp sensor like this? #4.) Which side of a big block gets the temperature sensor? Driver? Thanks ahead of time, and if you cant ansewe all of them please send TTT. __________________ Chuck 1972 C-20 Longhorn 402 BB .030" over (409?), curved HEI, RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit 1999 K1500 Suburban (old style) 5.7L Vortec 4L60E "No matter where you go, ........ there you are" Last edited by 72 longhorn BB; 11-14-2005 at 07:47 PM.

11-14-2005, 07:57 PM	#2
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,565	Re: 3 parts need identification + 1 question #1 is a spark plug wire heat shield... can't help on the others but here's a bump.. __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

11-14-2005, 08:30 PM	#3
demi Registered User Join Date: Sep 2003 Location: Arizona Posts: 305	Re: 3 parts need identification + 1 question #1 although it appears to be for a small block. #2 and #3 you can buy through a supplier that sells camaro or chevelle parts. Classic industries has them as well. You will also need to get the heat insulation for the green temp wire. This usually comes in a repair kit. #4 driver

11-14-2005, 09:03 PM	#4
72 longhorn BB Registered User Join Date: Jan 2000 Location: Michigan Posts: 312	Re: 3 parts need identification + 1 question Thanks, I'll check out classic ind. I can't imagine where the SB spark plugh wire heat shield came from though. Thanks again. __________________ Chuck 1972 C-20 Longhorn 402 BB .030" over (409?), curved HEI, RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit 1999 K1500 Suburban (old style) 5.7L Vortec 4L60E "No matter where you go, ........ there you are"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.