|
|
03-30-2011, 05:35 PM
|
#1 |
|
Just a car guy
Join Date: Feb 2006
Location: New Washington, IN
Posts: 900
|
Longer wheel studs?
Anyone know where I can find longer wheel studs for the rear on my 69?
.472"knurl 7/16"-20 Stock length is 1.5" I need 2"
__________________
1969 c10 swb stepside daily driver 1988 iroc pro touring project car 1955 belair bracket car that pretends to be a street car |
|
|
|
03-30-2011, 09:39 PM
|
#2 |
|
its all about the +6 inches
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 82,727
|
Re: Longer wheel studs?
napa
Go in with your info and they should be able to get them if they don't have them on hand |
|
|
|
|
03-31-2011, 08:27 AM
|
#3 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 20,428
|
Re: Longer wheel studs?
much better to take an old one with you the important part is to make sure the splined part is the same size
local autoparts store are a great source for common autorarts i prefer NAPA and CARQUEST as they normally have more knowelageble better trained(some even know how to read thru parts books) counter people from what i see most 7/16 are .480
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 03-31-2011 at 10:10 AM. |
|
|
|
|
03-31-2011, 09:52 AM
|
#4 |
|
Senior Member
 
Join Date: Aug 2009
Location: Alden NY
Posts: 1,771
|
Re: Longer wheel studs?
If I remember correctly, and there is always the possibility that I do not, I couldn't find longer stock 7/16" studs with that knurl a couple of years ago. I had put some 1/4" spacers on to bring the wheels out a little and wanted longer studs as I had only about 5-6 turns of the lug nuts. Never found them and removed the spacers.
__________________
My Blazer restoration album http://s249.photobucket.com/albums/g...20Restoration/ 71 Blazer K5 350/350 AC PS PB 65 GTO 389, 4 spd PS PB AM/FM, Posi PHS documented 65 Fairlane K car factory HiPo 4 spd- one of 750 built 12 Ram 1500 Limited - DD |
|
|
|
|
03-31-2011, 08:14 PM
|
#5 |
|
Registered User
Join Date: Jun 2005
Location: lawton ok
Posts: 25
|
Re: Longer wheel studs?
most parts stores around my area carry dorman studs. try this part # 610-157 the catalog says they are 3/8" to 1/2" LONGER
__________________
1970 chevy c10 305/th350 3.73 open p/s vintage air |
|
|
|
|
03-31-2011, 11:09 PM
|
#6 |
|
Just a car guy
Join Date: Feb 2006
Location: New Washington, IN
Posts: 900
|
Re: Longer wheel studs?
Thanks for the leads guys.
From what I have found, there is not a longer version in .472. Some guys on camaro sites said they used the .480 studs with little problems installing. The 610-187 appear to be .487 it's either longer studs or swap to 1" adapters. Posted via Mobile Device
__________________
1969 c10 swb stepside daily driver 1988 iroc pro touring project car 1955 belair bracket car that pretends to be a street car Last edited by OJ1988; 03-31-2011 at 11:16 PM. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
