sm465 hydraulic clutch slave bracket

[mud slut 350]

quick question. I recently aquired a hydraulic clutch pedal setup to replace my mechanical setup on my 82 k 10 with sm465. my question is i need to make a bracket to mount the slave cyl to the bellhousing without getting a new bellhousing that already has it. has anyone made one for the stock slave? novak has one but its only for their slave. any info pics or links where i could get one or a template to make one let me know please im anxious to swap this in! also do i need to make any changes in the clutch itself? in the throwout bearing or anything?

[DirtyLarry]

Originally Posted by mud slut 350

quick question. I recently aquired a hydraulic clutch pedal setup to replace my mechanical setup on my 82 k 10 with sm465. my question is i need to make a bracket to mount the slave cyl to the bellhousing without getting a new bellhousing that already has it. has anyone made one for the stock slave? novak has one but its only for their slave. any info pics or links where i could get one or a template to make one let me know please im anxious to swap this in! also do i need to make any changes in the clutch itself? in the throwout bearing or anything?

Advance Adapters has this one that works with a stock slave. I believe it will work with a stock SM465 bellhousing too. Not too bad at $40. I have this same bracket on my NV4500 and it works great!



You can use the same clutch, release bearing and fork as the mechanical set up….Or at least I did without issue but some claim there is a different release bearing for hydro set ups which I see no difference plus the part numbers are listed as the same on the Napa and AC Delco websites.

[mud slut 350]

Awesome! Exactly what I need. I thought about making one but wasn't sure of the offset and all
Posted via Mobile Device

[jdalexa84]

I know this is an ancient thread but did this bracket work for the Sm465.