Oil pan for LS2 ???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOOBYDOOBYDOO · 05-23-2013, 02:37 PM

What oil pan are you guys using for the ls 2 swap I have heard truck rear sump deep pans or camaro ???

67 chevelle · 05-23-2013, 03:21 PM

If you are not real low the stock truck pan sticks only an 1 1/2 below the crosmember , a muslecar pan is about even with it , cost around 170 on ebay shiped , im in the process of an ly6 , turbo 350 swap right now

68Stepbed · 05-25-2013, 08:02 AM

I used an f-body(Camaro/Trans Am) pan. It sits about 3/4" above the crossmember and tucks nicely into the stock crossmember. A Caddy CTS-V pan also works good. The truck pans hang below the crossmember by about 1 1/4" which could catch and hit on dips and uneven surfaces, especially if lowered.

short-t · 05-26-2013, 12:25 AM

I used the cts v oil pan, works like a charm.
Posted via Mobile Device

SCOOBYDOOBYDOO · 05-30-2013, 08:15 PM

Do you have the current part number for the ctsv oil pan ??

67 chevelle · 05-30-2013, 09:38 PM

that number is in this link you should check the whole sight
http://ls1tech.com/forums/conversion...-oil-pans.html

effects66 · 05-31-2013, 04:22 AM

CTS-V pan. Perfect fit and it's above the crossmember.

_______________

my build thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=556610

1970 c10 LSX (550hp) frame off

05-23-2013, 02:37 PM	#1
SCOOBYDOOBYDOO Registered User Join Date: Feb 2010 Location: DANA POINT CA Posts: 256	Oil pan for LS2 ???? What oil pan are you guys using for the ls 2 swap I have heard truck rear sump deep pans or camaro ??? __________________ ScoobyDoobyDoo

05-23-2013, 03:21 PM	#2
67 chevelle Registered User Join Date: May 2013 Location: WEST PALM FLORIDA Posts: 1,174	Re: Oil pan for LS2 ???? If you are not real low the stock truck pan sticks only an 1 1/2 below the crosmember , a muslecar pan is about even with it , cost around 170 on ebay shiped , im in the process of an ly6 , turbo 350 swap right now

05-25-2013, 08:02 AM	#3
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Oil pan for LS2 ???? I used an f-body(Camaro/Trans Am) pan. It sits about 3/4" above the crossmember and tucks nicely into the stock crossmember. A Caddy CTS-V pan also works good. The truck pans hang below the crossmember by about 1 1/4" which could catch and hit on dips and uneven surfaces, especially if lowered. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

05-26-2013, 12:25 AM	#4
short-t Registered User Join Date: Mar 2008 Location: Calgary, ab Posts: 324	Re: Oil pan for LS2 ???? I used the cts v oil pan, works like a charm. Posted via Mobile Device __________________ 1968 C10 LS2/4L70e swb fleet side. ECE front disk conversion and 3.5/5 drop. SOLD. 1968 C20 Custom Camper 396 50th survivor! SOLD to northerngmc

05-30-2013, 08:15 PM	#5
SCOOBYDOOBYDOO Registered User Join Date: Feb 2010 Location: DANA POINT CA Posts: 256	Re: Oil pan for LS2 ???? Do you have the current part number for the ctsv oil pan ?? __________________ ScoobyDoobyDoo

05-30-2013, 09:38 PM	#6
67 chevelle Registered User Join Date: May 2013 Location: WEST PALM FLORIDA Posts: 1,174	Re: Oil pan for LS2 ???? that number is in this link you should check the whole sight http://ls1tech.com/forums/conversion...-oil-pans.html

05-31-2013, 04:22 AM	#7
effects66 Registered User Join Date: Dec 2008 Location: San Jose Posts: 206	Re: Oil pan for LS2 ???? CTS-V pan. Perfect fit and it's above the crossmember. _______________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556610 1970 c10 LSX (550hp) frame off



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.