post latest 1/4 and 1/8 mile times and 60ft. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

flamingbig10 · 10-26-2013, 05:22 PM

68 C-10 KID · 10-26-2013, 08:27 PM

New personal best for me last night. The truck was mad and wanted to run last night. Had to go to the tower and sign a warning letter for safety infractions of no roll bar, jacket and harness.
The truck had more ET in it with a little more tuning. Might have been able to hit a low 11.4's
I had to turn down launch RPM and short shift the gears to keep it at the 11.5's

dinnut · 10-27-2013, 12:33 PM

Left lane....Upgraded to hp150 fuel pump... -8an to front of truck. Made this pass on 104 octane race gas and ngk 5673-8 gapped at .035 https://www.youtube.com/watch?v=KVL5...e_gdata_player

dinnut · 10-27-2013, 12:46 PM

63n 55 fuel jet Nos plate with big solenoids. Fuel pressure was low on this pass (a hair below 5) 33-34 degrees timing...raised fuel pressure to a hair under 6 after this pass and bottle pressure dropped and went 11.30 and 11.48 https://www.youtube.com/watch?v=YFyk...e_gdata_player

RICKSRAT · 10-28-2013, 10:09 AM

Dinnut good runs a 10sec slip coming soon with a couple more tweaks. Congrats and spraying can be addictive be careful...

GMR-PERFORMANCE · 11-21-2013, 10:46 AM

Quote:

Originally Posted by flamingbig10

http://youtu.be/SqIuTxMWFIE

Sounds good .. what stall are you running?

10-26-2013, 05:22 PM	#1
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: post latest 1/4 and 1/8 mile times and 60ft. http://youtu.be/SqIuTxMWFIE __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

10-26-2013, 08:27 PM	#2
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: post latest 1/4 and 1/8 mile times and 60ft. New personal best for me last night. The truck was mad and wanted to run last night. Had to go to the tower and sign a warning letter for safety infractions of no roll bar, jacket and harness. The truck had more ET in it with a little more tuning. Might have been able to hit a low 11.4's I had to turn down launch RPM and short shift the gears to keep it at the 11.5's Attached Images __________________ 427 SBC 683HP & 590ftlbsTRQ @ fly wheel. 60'-1.38 1/4-10.43 MPH-124.6 New ET current 4/2019 AKA MEAN GREEN.

10-27-2013, 12:33 PM	#3
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	Re: post latest 1/4 and 1/8 mile times and 60ft. Left lane....Upgraded to hp150 fuel pump... -8an to front of truck. Made this pass on 104 octane race gas and ngk 5673-8 gapped at .035 https://www.youtube.com/watch?v=KVL5...e_gdata_player Attached Images __________________ 70 longbed 496/th400/Ford 9"

10-27-2013, 12:46 PM	#4
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	Re: post latest 1/4 and 1/8 mile times and 60ft. 63n 55 fuel jet Nos plate with big solenoids. Fuel pressure was low on this pass (a hair below 5) 33-34 degrees timing...raised fuel pressure to a hair under 6 after this pass and bottle pressure dropped and went 11.30 and 11.48 https://www.youtube.com/watch?v=YFyk...e_gdata_player Attached Images __________________ 70 longbed 496/th400/Ford 9"

10-28-2013, 10:09 AM	#5
RICKSRAT Registered User Join Date: Apr 2000 Location: LAKE JACKSON TEXAS Posts: 343	Re: post latest 1/4 and 1/8 mile times and 60ft. Dinnut good runs a 10sec slip coming soon with a couple more tweaks. Congrats and spraying can be addictive be careful... __________________ '72 SWB 3,600# Indigo Blue , Sunset Racing Pump Gas 582" 1,002hp / 833tq ,Transking 400 W/ Transbrake, Moser Dana 60 w/4.30 Old Motor: 60'. 1.43 1/8 6.58@104.64 1/4. 10.42@127.10 Nitrous: 60'. 1.28 1/8. 6.15@ 112.02 1/4. 9.75@ 136.32



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.