longhorn Emblems for 1969 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

alloutpro · 02-07-2015, 03:33 AM

I am in need to purchase a set of longhorn emblems and the bed has 2 holes where the emblems were but unfortunately the originals were tore off and broken at some point in her life. I have the originals but can't convince myself to double side tape them on........anyone have a leeds on where i can get some? i have researched buying new ones but none specify if they have mounting prongs on them or not....

Help Chevy World!!!!!!!

SS Tim · 02-07-2015, 09:37 AM

Service replacements (aka NOS) should have all the pins present.
As well as the reproductions but asking a vendor directly would tell you today.

Emblem tape would probably work and surely be better than the screws I so often see. But you would need to do a lot of cutting to make it look right.

Since NPD right there in Ventura dosen't have them in stock you could call them and ask about the studs on a their "Trim Parts" brand reproduction.

https://www.npdlink.com/store/produc...61-101259.html

Or maybe down at Classic, Brothers or The Truck Shop.

**68350** · 02-07-2015, 11:07 AM

There was just a NOS set on ebay. I will also mention I have seen the longhorn emblems with 2 and I believe 4 studs

alloutpro · 02-07-2015, 02:00 PM

thanxz fellas,
i will check with NPD and i have seen both as well...thanxz...i wanted some that were a little weathered and showed their age due to the fact i dig the character....

SS Tim · 02-07-2015, 02:41 PM

If that is the case you need to become a subscriber and place a WTB "want to by" ad in the classified section.

For what its worth it looks like the eBay service replacement parts are tape backed and only use the two pins as locators. If yours are not bent you can probably put them back with tape. Just do it correctly with name brand tape and chemically clean surfaces, warm metal and a heat gun.

If you haven't been to NPD's warehouse there in Ventura its worth the trip.

muley · 02-09-2015, 11:46 PM

My 69 Longhorn appears to have never had the emblems installed.
No holes in the fender. Was that common?

**Already Gone** · 02-10-2015, 12:09 AM

Quote:

Originally Posted by muley

My 69 Longhorn appears to have never had the emblems installed.
No holes in the fender. Was that common?

Check my avatar.. My truck is original with no holes.

muley · 02-10-2015, 10:48 AM

I see that. Mine is faded red but no shadow lettering behind it. It doesn't appear they were there for some reason. None the less, $99 a pop, I won't be springing for them anyway.

Longhorn 70 · 02-10-2015, 10:59 AM

Quote:

Originally Posted by muley

My 69 Longhorn appears to have never had the emblems installed.
No holes in the fender. Was that common?

My 70 didn't have holes. I have a set of emblems....2 pin emblems. One has a pin broken off so I got them for free. What I plan on doing is

Carefully removing all pins.
Gluing 400 grit sandpaper to a flat surface.
Smoothing and flattening the surface of the emblems.
Clean and paint emblems.
Use the 3M emblem tape 03609 to attach.

Now if I can only find exactly where they should be on a 70, I'm good.

Jesus5150 · 02-10-2015, 07:08 PM

I pulled my longhorn emblems off the bed and put them on a set of lockers that i put my coats in. Nice "Garage Flair"

Mayo · 02-10-2015, 09:37 PM

Quote:

Originally Posted by Longhorn 70

My 70 didn't have holes. I have a set of emblems....2 pin emblems. One has a pin broken off so I got them for free. What I plan on doing is

Carefully removing all pins.
Gluing 400 grit sandpaper to a flat surface.
Smoothing and flattening the surface of the emblems.
Clean and paint emblems.
Use the 3M emblem tape 03609 to attach.

Now if I can only find exactly where they should be on a 70, I'm good.

The emblems on the 69-72 Longhorns go in front of the rear marker light while the 68s had the emblem above the marker light

02-07-2015, 03:33 AM	#1
alloutpro Registered User Join Date: Nov 2013 Location: ventura,CA Posts: 33	longhorn Emblems for 1969 I am in need to purchase a set of longhorn emblems and the bed has 2 holes where the emblems were but unfortunately the originals were tore off and broken at some point in her life. I have the originals but can't convince myself to double side tape them on........anyone have a leeds on where i can get some? i have researched buying new ones but none specify if they have mounting prongs on them or not.... Help Chevy World!!!!!!! __________________ Roll Tide! '69 C20 Longhorn 396

02-07-2015, 09:37 AM	#2
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: longhorn Emblems for 1969 Service replacements (aka NOS) should have all the pins present. As well as the reproductions but asking a vendor directly would tell you today. Emblem tape would probably work and surely be better than the screws I so often see. But you would need to do a lot of cutting to make it look right. Since NPD right there in Ventura dosen't have them in stock you could call them and ask about the studs on a their "Trim Parts" brand reproduction. https://www.npdlink.com/store/produc...61-101259.html Or maybe down at Classic, Brothers or The Truck Shop. Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban Last edited by SS Tim; 02-07-2015 at 09:44 AM.

02-07-2015, 11:07 AM	#3
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: longhorn Emblems for 1969 There was just a NOS set on ebay. I will also mention I have seen the longhorn emblems with 2 and I believe 4 studs __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

02-07-2015, 02:00 PM	#4
alloutpro Registered User Join Date: Nov 2013 Location: ventura,CA Posts: 33	Re: longhorn Emblems for 1969 thanxz fellas, i will check with NPD and i have seen both as well...thanxz...i wanted some that were a little weathered and showed their age due to the fact i dig the character.... __________________ Roll Tide! '69 C20 Longhorn 396

02-07-2015, 02:41 PM	#5
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: longhorn Emblems for 1969 If that is the case you need to become a subscriber and place a WTB "want to by" ad in the classified section. For what its worth it looks like the eBay service replacement parts are tape backed and only use the two pins as locators. If yours are not bent you can probably put them back with tape. Just do it correctly with name brand tape and chemically clean surfaces, warm metal and a heat gun. If you haven't been to NPD's warehouse there in Ventura its worth the trip. __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

02-09-2015, 11:46 PM	#6
muley Registered User Join Date: Aug 2013 Location: Homedale, Idaho Posts: 160	Re: longhorn Emblems for 1969 My 69 Longhorn appears to have never had the emblems installed. No holes in the fender. Was that common? __________________ Grandpa 1953 M38A1 Jeep 1989 GMC K2500 1958 Alaskan Camper all original WORK : A necessary evil that finances what I really like to do.

02-10-2015, 10:48 AM	#8
muley Registered User Join Date: Aug 2013 Location: Homedale, Idaho Posts: 160	Re: longhorn Emblems for 1969 I see that. Mine is faded red but no shadow lettering behind it. It doesn't appear they were there for some reason. None the less, $99 a pop, I won't be springing for them anyway. __________________ Grandpa 1953 M38A1 Jeep 1989 GMC K2500 1958 Alaskan Camper all original WORK : A necessary evil that finances what I really like to do.

02-10-2015, 07:08 PM	#10
Jesus5150 Registered User Join Date: Oct 2013 Location: Spokane Valley Washington Posts: 87	Re: longhorn Emblems for 1969 I pulled my longhorn emblems off the bed and put them on a set of lockers that i put my coats in. Nice "Garage Flair"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.