Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
10-15-2017, 09:23 AM | #1 |
Registered User
Join Date: Dec 2014
Location: Racine WI
Posts: 27
|
need help wiring my safety switch to solenoid
Need help wiring my safety switch to solenoid just like the pic below. Any help would be great. Thanks and its a 1986 chevy c10
|
10-15-2017, 11:43 AM | #2 |
Registered User
Join Date: Dec 2014
Location: Racine WI
Posts: 27
|
Re: need help wiring my safety switch to solenoid
AnybodY???
|
10-15-2017, 01:09 PM | #3 |
Registered User
Join Date: Jun 2008
Location: Moss Point,Ms.
Posts: 1,439
|
Re: need help wiring my safety switch to solenoid
What are you trying to do?
Is the solenoid to be powered by the neutral safety switch? Or,is the solenoid to be powered/controled elsewhere and used as a sort of anti-theft device? Tell us in detail what you have in mind. Mike. |
10-15-2017, 01:15 PM | #4 |
Registered User
Join Date: Dec 2014
Location: Racine WI
Posts: 27
|
Re: need help wiring my safety switch to solenoid
Right now she starts in any position and almost went through my garage so I installed a Lokar floor shifter and got rid of the B an M shifter cause that was a mess. So I just want the truck to start in only the Park and neutral position.
|
10-15-2017, 03:24 PM | #5 |
Registered User
Join Date: Dec 2007
Location: Livingston WI
Posts: 65
|
Re: need help wiring my safety switch to solenoid
NSS is just an interrupt, take the leads from the new shifter and plug one each in the sockets on the factory connecter.
If the new switch is set up correctly you'll only get a full circuit in P or N. |
Bookmarks |
|
|