GA Parting 1966 panel truck

[southern parts]

pics of the shroud and pulleys
pulley part numbers are 3744043 and 3751232
I`ll try to figure shipping tomorrow if your still interested.

[aerotruk63]

I'll take the shroud , both pulleys.
Power steering pump bracket thats missing which one?

[aerotruk63]

Is the water pump pulley a double or two singles?

[southern parts]

it`s missing the bracket that goes from the back of the pump to under the motor mount ( I might have one from another pump) will check on that tomorrow too. the wp pulley is 2 groove. I cant find a part #.

[aerotruk63]

Ok thanks

[aerotruk63]

That wood floor looks to be in nice shape.

[southern parts]

A few more Custom Trim pictures

[1960chevypanel]

Originally Posted by southern parts

A few more Custom Trim pictures

Any deep scratches or dents on the driver's door piece? If not I'll take the set.

[kerber63]

Thanks for the pics woody. I’m going to pass on the trim.

[southern parts]

Most of the anodizing is gone from it but no deep scratches. I am still trying to figure how to ship. The trim is almost 8' long

[aerotruk63]

4" Pvc drain pipe from Home Depot make for great shipping tube for moldings. USPS accepted the slight overlength as well at regular rate.

[southern parts]

Great minds think alike.
Couple more pics of the drivers door piece

[aerotruk63]

Are you sure you want your mind associated to mine? Lol

[southern parts]

aerotruk, I don't have another power steering pump bracket. Here's water pump pulley and the one bracket that was on the pump . It has been welded by the hook . Are you interested in these? $40 for both.

[aerotruk63]

I'll pass on both. Have the double water pump pulley already. Will try to find a complete power steering pump setup. Thank you for your consideration and effort.

Norm

[aerotruk63]

Payment sent for shroud and crank pulleys.

[southern parts]

Here's a few more grill and bumper pics.

[Killer Bee]

Originally Posted by Killer Bee

thank you! the $35 in the middle is for the heater control, not the rusted thru sills, right?

assuming so, I'll take the lot at your asking, I come up with $215? please try to get all of the radio speaker bracket stuff, thanks!

and feel free to toss in any other loose screws, clips, knobs, etc. that a guy might need

please quote shipping to 90744 commercial address

thanks and PM headed your way!

Originally Posted by Killer Bee

actually, please quote both wiper and headlight switches with knobs, and instrument cluster complete..

on the fence but right price may tip me over, lol.. thanks!

paypal sent for all, thanks again Woody, have a great weekend!

[pimpston65]

Woody, thank you very much for allowing me to stop by and pull the parts in need. you rock!!!

[oldtrux]

is front bumper still available?
any dents or tweaks?
shipping to 14304

[aerotruk63]

Originally Posted by pimpston65

Woody, thank you very much for allowing me to stop by and pull the parts in need. you rock!!!

And you didn't pick up my shroud? Some quasi freind you are! Lol

[pimpston65]

Originally Posted by aerotruk63

And you didn't pick up my shroud? Some quasi freind you are! Lol

i didnt think it would fit it in the overhead storage on the plane. heck i dont even know how ima get my parts home...

[1966 K10]

Couldnt tell if its already sold but interested in the heater control

thanks

[Killer Bee]

Originally Posted by 1966 K10

Couldnt tell if its already sold but interested in the heater control

thanks

I got it for parts but might be able to spare some things.. parts I'm keeping for sure, center fan lever with knob and switch..

I put an LMC part in from their kit and I don't like it.. and after I changed the blower relay, now only two speeds so maybe switch?

welcome to pm me, I live in OC and work in the Harbor so we may be close enough to meet ftf..

[aerotruk63]

Originally Posted by pimpston65

i didnt think it would fit it in the overhead storage on the plane. heck i dont even know how ima get my parts home...

Thank
You are one dedicated builder.