TX WTB 67 RH Fender and tail lights stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sleipnir · 07-05-2018, 09:59 AM

Smacked my fender pretty good on my garage when backing out so I am looking for a decent fender to replace it. Also looking for a pair of stepside tail lights. I'm between located in San Antonio and Austin.

Shortstep67 · 07-05-2018, 01:47 PM

I have a passenger side for a 68. You can have for free, if you want to pick it up in San Antonio.

Sleipnir · 07-05-2018, 01:50 PM

Quote:

Originally Posted by Shortstep67

I have a passenger side for a 68. You can have for free, if you want to pick it up in San Antonio.

Sounds good to me! Just shoot me the address and I will pick it up tomorrow! Can you send me some pictures of it too?

cypressbog · 07-05-2018, 05:51 PM

I can sell you a set of rear lights for a step-side. Do you only need the assembly or the mounting bracket too. Just tail lights or reverse lights too?

Shortstep67 · 07-05-2018, 08:56 PM

Quote:

Originally Posted by Sleipnir

Sounds good to me! Just shoot me the address and I will pick it up tomorrow! Can you send me some pictures of it too?

9111 Broadway, just north of 410. I’ll be there til 3:00 tomorrow. My work place.
Posted via Mobile Device

Shortstep67 · 07-05-2018, 09:13 PM

Quote:

Originally Posted by Sleipnir

Sounds good to me! Just shoot me the address and I will pick it up tomorrow! Can you send me some pictures of it too?

I’ll be at work till 3:00 on Friday. 9111 Broadway, just north of 410. I can’t seem to get the pictures updated. The fender is in good condition.
Posted via Mobile Device

Sleipnir · 07-05-2018, 09:14 PM

Quote:

Originally Posted by Shortstep67

I’ll be at work till 3:00 on Friday. 9111 Broadway, just north of 410. I can’t seem to get the pictures updated. The fender is in good condition.
Posted via Mobile Device

Awesome I'll be there in the morning!

Sleipnir · 07-05-2018, 09:16 PM

Quote:

Originally Posted by cypressbog

I can sell you a set of rear lights for a step-side. Do you only need the assembly or the mounting bracket too. Just tail lights or reverse lights too?

Wish I saw this earlier because I just bought a pair from classic industries

Sleipnir · 07-06-2018, 11:25 AM

Sorry guys I didn't specify the fender! I need a 67 FRONT passenger fender

Thanks for the help Bill! Sorry I didn't specify!

Sleipnir · 07-09-2018, 08:20 AM

Bump still looking for a FRONT 67 passenger fender

Sleipnir · 07-12-2018, 08:22 AM

Bump still looking for a fender. Facecrack and Craigslist hasnt been fruitful. Also looking for a decent rear bumper.

Sleipnir · 07-16-2018, 02:04 PM

Bump still looking.

Sleipnir · 07-26-2018, 11:20 AM

Still looking

Sleipnir · 07-30-2018, 01:17 PM

bump still looking

Sleipnir · 07-30-2018, 04:30 PM

Quote:

Originally Posted by michael bustamante

im going to be picking up a 67 passenger side fender today. if you like I can send you pics after I get it

That'd be great. How much did you want for it?

ABQ-C10 · 07-31-2018, 11:54 AM

I may have one for you as well. Let me see what I'll be using for my rebuild....

Sleipnir · 07-31-2018, 12:01 PM

Quote:

Originally Posted by ABQ-C10

I may have one for you as well. Let me see what I'll be using for my rebuild....

Sounds good thanks!

Sleipnir · 08-06-2018, 08:46 AM

bump

Sleipnir · 08-13-2018, 09:20 AM

Still looking. There's gotta be someone around that has one

Sleipnir · 08-22-2018, 11:34 AM

Bump it up

**michael bustamante** · 08-22-2018, 02:51 PM

so it turned to be a 68 fender. needs minor work for it to be cherry. (nose of the fender needs to be bumped out and finished) interested?

ABQ-C10 · 09-06-2018, 04:42 PM

Still need one?

Critter · 01-17-2019, 11:24 AM

I have a nos 68 front fender if you're still looking. Been sitting a while, no box, surface rust is starting to speckle, not the prettiest NOS but its still very usable. I'd take $450 from someone here.

07-05-2018, 09:59 AM	#1
Sleipnir Registered User Join Date: Oct 2017 Location: Seguin, TX Posts: 89	WTB 67 RH Fender and tail lights stepside Smacked my fender pretty good on my garage when backing out so I am looking for a decent fender to replace it. Also looking for a pair of stepside tail lights. I'm between located in San Antonio and Austin. __________________ 67 C10 "Big Red"

07-05-2018, 01:47 PM	#2
Shortstep67 Registered User Join Date: May 2012 Location: San Antonio, Texas Posts: 6	Re: WTB 67 RH Fender and tail lights stepside I have a passenger side for a 68. You can have for free, if you want to pick it up in San Antonio.

07-05-2018, 05:51 PM	#4
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: WTB 67 RH Fender and tail lights stepside I can sell you a set of rear lights for a step-side. Do you only need the assembly or the mounting bracket too. Just tail lights or reverse lights too?

07-06-2018, 11:25 AM	#9
Sleipnir Registered User Join Date: Oct 2017 Location: Seguin, TX Posts: 89	Re: WTB 67 RH Fender and tail lights stepside Sorry guys I didn't specify the fender! I need a 67 FRONT passenger fender Thanks for the help Bill! Sorry I didn't specify! __________________ 67 C10 "Big Red"

07-09-2018, 08:20 AM	#10
Sleipnir Registered User Join Date: Oct 2017 Location: Seguin, TX Posts: 89	Re: WTB 67 RH Fender and tail lights stepside Bump still looking for a FRONT 67 passenger fender __________________ 67 C10 "Big Red"

07-12-2018, 08:22 AM	#11
Sleipnir Registered User Join Date: Oct 2017 Location: Seguin, TX Posts: 89	Re: WTB 67 RH Fender and tail lights stepside Bump still looking for a fender. Facecrack and Craigslist hasnt been fruitful. Also looking for a decent rear bumper. __________________ 67 C10 "Big Red"

07-16-2018, 02:04 PM	#12
Sleipnir Registered User Join Date: Oct 2017 Location: Seguin, TX Posts: 89	Re: WTB 67 RH Fender and tail lights stepside Bump still looking. __________________ 67 C10 "Big Red"

07-26-2018, 11:20 AM	#13
Sleipnir Registered User Join Date: Oct 2017 Location: Seguin, TX Posts: 89	Re: WTB 67 RH Fender and tail lights stepside Still looking __________________ 67 C10 "Big Red"

07-30-2018, 01:17 PM	#14
Sleipnir Registered User Join Date: Oct 2017 Location: Seguin, TX Posts: 89	Re: WTB 67 RH Fender and tail lights stepside bump still looking __________________ 67 C10 "Big Red"

07-31-2018, 11:54 AM	#16
ABQ-C10 Registered User Join Date: Jan 2017 Location: Rio Rancho, NM Posts: 92	Re: WTB 67 RH Fender and tail lights stepside I may have one for you as well. Let me see what I'll be using for my rebuild.... __________________ 1967 C-10 Stepside - The "Patina Machina" build here! SOLD 1984 Chevy C30 crew cab dually - 454/4L80E, Airbags, 4-link/Watts link, 22" Alcoa wheels Patina Customs

08-06-2018, 08:46 AM	#18
Sleipnir Registered User Join Date: Oct 2017 Location: Seguin, TX Posts: 89	Re: WTB 67 RH Fender and tail lights stepside bump __________________ 67 C10 "Big Red"

08-13-2018, 09:20 AM	#19
Sleipnir Registered User Join Date: Oct 2017 Location: Seguin, TX Posts: 89	Re: WTB 67 RH Fender and tail lights stepside Still looking. There's gotta be someone around that has one __________________ 67 C10 "Big Red"

08-22-2018, 11:34 AM	#20
Sleipnir Registered User Join Date: Oct 2017 Location: Seguin, TX Posts: 89	Re: WTB 67 RH Fender and tail lights stepside Bump it up __________________ 67 C10 "Big Red"

08-22-2018, 02:51 PM	#21
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: WTB 67 RH Fender and tail lights stepside so it turned to be a 68 fender. needs minor work for it to be cherry. (nose of the fender needs to be bumped out and finished) interested? __________________ 1967custom

09-06-2018, 04:42 PM	#22
ABQ-C10 Registered User Join Date: Jan 2017 Location: Rio Rancho, NM Posts: 92	Re: WTB 67 RH Fender and tail lights stepside Still need one? __________________ 1967 C-10 Stepside - The "Patina Machina" build here! SOLD 1984 Chevy C30 crew cab dually - 454/4L80E, Airbags, 4-link/Watts link, 22" Alcoa wheels Patina Customs



Register or Log In To remove these advertisements.

01-17-2019, 11:24 AM	#23
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: WTB 67 RH Fender and tail lights stepside I have a nos 68 front fender if you're still looking. Been sitting a while, no box, surface rust is starting to speckle, not the prettiest NOS but its still very usable. I'd take $450 from someone here. Attached Images __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

Register or Log In To remove these advertisements.