Rear Bumper measurements - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Noah96 · 07-01-2019, 09:11 PM

Looking to fab my own 3/4 but need some dimensions first. Was wandering if anyone out there wouldnt mind stretching a tap measure across one for the lenght, depth, height and width.
Name: bumper.jpg
Views: 685
Size: 81.7 KB

Name: bumper.jpg
Views: 685
Size: 81.7 KB

Name: bumper2.jpg
Views: 703
Size: 29.9 KB

Noah96 · 07-09-2019, 09:09 PM

Ttt

**FirstOwner69** · 07-09-2019, 10:55 PM

I can probably get this one out of storage and take some measurements if you are interested. It is an aftermarket bumper which telescopes out for an extended camper. It does tuck tightly to the truck though and could be mounted without the telescoping feature. It originally had only 4 holes for brackets, but I added four to use it on newer trucks. I also added the hitch receiver.

Noah96 · 07-10-2019, 09:23 AM

Thank You so much really i'm looking for the measurements of the bumper itself and once I get that I can figure on some brackets. If it wouldn't be any trouble Id sure appericate the measurements.

**tdangle** · 07-10-2019, 01:09 PM

I have a bumper like the one on the GMC. I can get you measurements this weekend if you still need them.

Noah96 · 07-10-2019, 04:51 PM

Yes Ill take all the measurements I can get.

**FirstOwner69** · 07-11-2019, 12:33 AM

Quote:

Originally Posted by Noah96

Thank You so much really i'm looking for the measurements of the bumper itself and once I get that I can figure on some brackets. If it wouldn't be any trouble Id sure appreciate the measurements.

Here you go... The diamond plate is set back 1/2" from the edge of the 4" vertical "channel iron".

Noah96 · 07-11-2019, 02:00 PM

Thank you so much hope to get some metal soon to build it.

07-01-2019, 09:11 PM	#1
Noah96 Registered User Join Date: Aug 2016 Location: Danville Wv Posts: 266	Rear Bumper measurements Looking to fab my own 3/4 but need some dimensions first. Was wandering if anyone out there wouldnt mind stretching a tap measure across one for the lenght, depth, height and width.

07-09-2019, 09:09 PM	#2
Noah96 Registered User Join Date: Aug 2016 Location: Danville Wv Posts: 266	Re: Rear Bumper measurements Ttt

07-09-2019, 10:55 PM	#3
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,841	Re: Rear Bumper measurements I can probably get this one out of storage and take some measurements if you are interested. It is an aftermarket bumper which telescopes out for an extended camper. It does tuck tightly to the truck though and could be mounted without the telescoping feature. It originally had only 4 holes for brackets, but I added four to use it on newer trucks. I also added the hitch receiver. Attached Images

07-10-2019, 09:23 AM	#4
Noah96 Registered User Join Date: Aug 2016 Location: Danville Wv Posts: 266	Re: Rear Bumper measurements Thank You so much really i'm looking for the measurements of the bumper itself and once I get that I can figure on some brackets. If it wouldn't be any trouble Id sure appericate the measurements.

07-10-2019, 01:09 PM	#5
tdangle Senior Member Join Date: Mar 2005 Location: Jurupa Valley, Ca Posts: 1,210	Re: Rear Bumper measurements I have a bumper like the one on the GMC. I can get you measurements this weekend if you still need them. __________________ Terry 1970 Custom Camper/C20 , GM Crate 350/7004R, Dana 60, factory AC

07-10-2019, 04:51 PM	#6
Noah96 Registered User Join Date: Aug 2016 Location: Danville Wv Posts: 266	Re: Rear Bumper measurements Yes Ill take all the measurements I can get.

07-11-2019, 02:00 PM	#8
Noah96 Registered User Join Date: Aug 2016 Location: Danville Wv Posts: 266	Re: Rear Bumper measurements Thank you so much hope to get some metal soon to build it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.