Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-15-2019, 02:47 PM | #1 |
Registered User
Join Date: Jun 2014
Location: Esko
Posts: 23
|
1967 Interior Gloss Level??
Hi Folks,
Been lurking here awhile but this is my first post with question, I think. I am doing a body-off resto of a 67 c10 longbed. I want to go bare bones, full stock, 250 ci, white trim, medium blue poly color, radio delete, etc. to match my first vehicle when I turned 16. I am to the point of laying paint on the cab and have a question: What was the sheen of the painted surfaces on the interior of the cab? My recollection is that is was less glossy than the exterior but am struggling to visualize if everything/anything inside was muted gloss, just parts, or what. I apologize if there is a thread already here I did not find while searching but could really use some expertise. Thank you in advance!! smerkey is online now Report Post |
08-15-2019, 03:23 PM | #2 |
Registered User
Join Date: Aug 2014
Location: Mena,Arkansas
Posts: 485
|
Re: 1967 Interior Gloss Level??
If you are spraying from a gun then talk with your paint supplier. Most paint lines have flattener that you can add to the paint to get the proper sheen. Mix the paint as you normally would then shoot a test panel. Don't mix much as this could get expensive.Make note of how much on each test panel.Should only take a couple before you get it like you want. Back to your question. I think my 68' only has the top of the dash in flat. 67" may be different.
__________________
68' with no bells or whistles unless I add'em. |
08-15-2019, 05:33 PM | #3 |
Post Whore
Join Date: May 2015
Location: Alabama
Posts: 14,557
|
Re: 1967 Interior Gloss Level??
i used flattner in my IH interior and underhood..it turned out kind of a matt finish which is what i wanted,,,the spec sheet tells what ratio to mix for each sheen..
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
08-15-2019, 06:01 PM | #4 |
Registered User
Join Date: Jun 2014
Location: Esko
Posts: 23
|
Re: 1967 Interior Gloss Level??
Any thoughts as to whether the interior, as built, was a different sheen? Mine seems to be semi-gloss or matte, but I'm not sure if thats just age or if that was factory? I can muster making the sheen I want...I just don't know what I want yet as I'm trying to go as stock as possible.
|
08-15-2019, 06:32 PM | #5 |
Senior Member
Join Date: Feb 2014
Location: new smyrna beach fl / 29 palms cal
Posts: 1,727
|
Re: 1967 Interior Gloss Level??
It was originally a satin finish did mine in BC w/a flattering agent witch wasn’t cheap. I have not painted my steering wheel and column but think I will do it in a glass. primarily because as you handle it you’re hands will shine it up don’t know why the dash looks flat it’s really like the back of the cab
__________________
Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent |
08-15-2019, 06:48 PM | #6 |
Registered User
Join Date: Jun 2014
Location: Esko
Posts: 23
|
Re: 1967 Interior Gloss Level??
nsb29, Thanks! Looks good, BTW.
|
08-16-2019, 07:27 PM | #7 |
Registered User
Join Date: Jun 2014
Location: Esko
Posts: 23
|
Re: 1967 Interior Gloss Level??
What brand stuff did you use? What ratio of flattener? I assume a 4:1 urethane clear coat .
|
08-16-2019, 09:17 PM | #8 |
Senior Member
Join Date: Feb 2014
Location: new smyrna beach fl / 29 palms cal
Posts: 1,727
|
Re: 1967 Interior Gloss Level??
Don’t remember the ratio but the flatting agent is all gone and there about an inch of clear left, I went this route because the semi gloss was too shiny, and the flat to flat don’t remember but the flatting agent was pricey! In order to get the Color I wanted i had to have it mixed in shop line “Champagne sum thing poly” not my favorite brand paint but put good clear on top
__________________
Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|