Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
03-25-2024, 03:40 PM | #1 |
Registered User
Join Date: Aug 2020
Location: Salmon Arm BC
Posts: 149
|
Re: Black Gold Build, v2.5
I think that rear gear is pretty high and a 3.73 or 4.10 would be better fit and still ok cruising in OD. That said you should be making enough power that even with 3.07's it will have no problem burning tires off.
I have never used water/meth but expect it would be a bit more work to tune than with an air to air intercooler.
__________________
1970 C10 l/b 292/4spd Build: http://67-72chevytrucks.com/vboard/s...d.php?t=811062 |
04-17-2024, 12:54 AM | #2 |
Registered User
Join Date: Feb 2012
Location: Fruitport, MI
Posts: 36
|
Re: Black Gold Build, v2.5
I have heard mixed reviews on the gear. Some people say that 3.07 is decent with a turbo. Helps load up for spool and not blow the tires off the line. I don't think it will matter much. Tires wont hook for awhile I'm assuming!
I'll try the 3.07 and if I find it miserable then I'll go 3.73. |
04-17-2024, 01:00 AM | #3 |
Registered User
Join Date: Feb 2012
Location: Fruitport, MI
Posts: 36
|
Re: Black Gold Build, v2.5
Progress is slow but progress none the less.
Got 1 side almost back together, have 90% of the parts for the engine parts, engine primed, and did some paint sampling on one dog dish. I am liking the metallic gold. Prolly going with that and the same with the front bowtie. |
Bookmarks |
|
|