|
05-11-2024, 09:00 PM | #1 |
Registered User
Join Date: Jun 2021
Location: Charleston, South Carolina
Posts: 30
|
Re: 1970 C10 project
I made some more progress and have the engine sitting in the truck. Since I'm using the Holley LS frame mounts, they work with the Gen V engines by changing the clamshells that mount on the engine. I swapped out the oil pan with a Holley knock-off pan. All of the accessories from the Camaro fit, but I swapped out the Camaro's alternator with one from an LS truck since the plugs are on the back and not on the side.
|
05-26-2024, 09:18 PM | #2 |
Registered User
Join Date: Jun 2021
Location: Charleston, South Carolina
Posts: 30
|
Re: 1970 C10 project
I made some more progress, installed speed engineering headers.
Passenger side fit great, Driver side didnt really fit at all. I had to cut my engine mount bracket and dent the headers in several spots. I also went to a pick and pull and pulled two different Volvo electric power steering pumps. One with a built in reservoir and one without. The only place i think i can put it is near the core support. |
Bookmarks |
|
|