Bowler clutch pedal conversion for nv4500/th400 swap

[cdub2010]

Thanks for all the tips just following up - finally installed this, but it went in a 84 k30.

The setup from bowler is very nice, went together real easy, welded it all together and mounted up very nice and rock solid with the bracing. Cut my stock brake pedal. Used a Wilwood gs master, a quick connect fitting to 4an line to the release bearing and a gm remote reservoir. Ill probably redo my first attempt at bracing rod to the firewall. Similar money compared to a buying a used hydraulic pedal from ebay.