show me your 73-87 lowered/bagged c10's

[BB72CHEVKT]

Originally Posted by Scudboy

Here's my daily driver. I lowered it with the McGaughys 4.5 / 6 kit. It also has a 2 inch lowering shackle in the back but it's only down about 1 inch. It also has Belltech street performance shocks and is rolling on 20" American Racing Torq Thrust II's.

Very nice. Any shock relocation? How is the ride? My 71 burb has a 4.5/6 and rides great but I have never had a lowered square and I am about to buy one. It comes with a set of
20" torque thrust so I just need to figure the drop part out.

[Scudboy]

Originally Posted by BB72CHEVKT

Very nice. Any shock relocation? How is the ride? My 71 burb has a 4.5/6 and rides great but I have never had a lowered square and I am about to buy one. It comes with a set of
20" torque thrust so I just need to figure the drop part out.

No shock relocation was needed with these. The ride is great. It handles a lot better than before. As with any lowered vehicle...you've just gotta be careful of the occasional pothole or poor fitting manhole cover.

[Blitz]

Originally Posted by Scudboy

Here's my daily driver.

That is EXACTLY the look I want if I get a Square, except in white. I'm a bit jealous. lol

Very very nice

[Scudboy]

Originally Posted by Blitz

That is EXACTLY the look I want if I get a Square, except in white. I'm a bit jealous. lol

Very very nice

Thank you.

[63-73stepside]

here is my 73

[Scudboy]

Originally Posted by 63-73stepside

here is my 73

I like it. The Green color and the Red smoothie wheels look good together.

[68c10owner]

Here is my 85 GMC. No idea how low it is. PO chopped the front coils and removed most of the leafs. I plan to replace everything and do a proper 4/6. Wheels are old Progressive mags with 235/70/15.

[made2drag]

Originally Posted by 68c10owner

Here is my 85 GMC. No idea how low it is. PO chopped the front coils and removed most of the leafs. I plan to replace everything and do a proper 4/6. Wheels are old Progressive mags with 235/70/15.

cool. which leaves did you take out and how much did you cut off the coils? I just got another 86 and im gonna do a free drop also

[Wilson!]

4/6 drop. 2" modular spindles, 2" springs, and shock reclocators on front, flip kit on rear.

[higgiec10]

Originally Posted by Wilson!

4/6 drop. 2" modular spindles, 2" springs, and shock reclocators on front, flip kit on rear.

Want size are the wheels nice truck

[PcolaC10]

My 87 Sierra

[PcolaC10]

Another shot.

[muthstryker]

Originally Posted by higgiec10

Want size are the wheels nice truck

X2 wheel and tire specs?

[muthstryker]

Originally Posted by higgiec10

Want size are the wheels nice truck

X2 wheel and tire specs?

[made2drag]

love the wheels and execution of styling!

[67-72C10]

My 76 C10 with 4/6 drop

[NewType72]

My pops 73 that we've been tinkering with for the past few months. Always been in the family since it was new, getting a full airride treatment with custom trailing arm setup instead of four link. No modified sheetmetal aside from beginning to English wheel the inner fenders in front. But we're at 3 3/8 to pinch weld in the front and about five at the back.

[bustedknuckles]

[MURPH82]

Here is my 84 that i am almost done with

[Luke M]

Originally Posted by MURPH82

Here is my 84 that i am almost done with

Beautiful truck!

[made2drag]

Originally Posted by MURPH82

Here is my 84 that i am almost done with

perfection!

[VerticalSmile]

Not quite done yet. Air Ride Tech

[cochran63]

Here is my 88 r10 on a ridetech level 2, but with accuair managing the air ride

[SKT]

Originally Posted by cochran63

Here is my 88 r10 on a ridetech level 2, but with accuair managing the air ride

.
.

Wow, great looking truck!

Do you have a link to a build thread or any additional pics?

.
.

[Rednek13x]

Before

After. One week later