How about some pics of 73-91 crew cabs - Page 143 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe231 · 11-22-2011, 10:11 PM

Quote:

Originally Posted by thirdstreettito

I'm seriously considering doing that to my diesel Burb....

I put some new wheels and tires on my crew

SS From the "Wood" · 11-22-2011, 11:20 PM

Quote:

Originally Posted by billybigrig1989

Icredible job on the build SS it looks awesome, as for my seats I'll have to see if I can find the photos ogre brackets but it's pretty basic. Just cut the humps out of the floor and welded in a flat piece of plate. Then where the divets in the floor drop lower than the play I welded in some 1.5 x 3 inch tubing and dropped a bolt through the seat rail mounts throughout the tubing and the floor. I'll try and find some pics . Thanks for the interest.
Posted via Mobile Device

actually, that was a previous post quote... I haven't started my build yet. I've got a pending project on an '84 CC that's already been shortened to 1/2 ton. I hope to dig into this 1st of the year. I wanna do the late model buckets w/ seatbelts integrated, and that's why I inquired on you build. Cool truck BTW!

yousesteers · 11-22-2011, 11:44 PM

Quote:

Originally Posted by SCOTI

You should post up some info on your swap in a build thread. Several guys on here looking to do similar swaps so the more experienced info shared, the better/easier the swaps get.

I have been thinking about doing a build thread on this truck I am no expert on the swap but mine does work great and is a work in progress my biggest problem is I take very few pictures of anything when working on it. I may start a build thread on the truck in a few days

texasfunk · 11-23-2011, 01:37 AM

My 86..under construction...

Posted via Mobile Device

SCOTI · 11-23-2011, 02:27 AM

Quote:

Originally Posted by yousesteers

I have been thinking about doing a build thread on this truck I am no expert on the swap but mine does work great and is a work in progress my biggest problem is I take very few pictures of anything when working on it. I may start a build thread on the truck in a few days

Well, we've all met 'experts' that feel their way is the only way. Then there's the guy that has experience & admits his way worked but feels this or that could be approached differently for better results.

Most guys on this board will take that shared experience

.

joe231 · 11-23-2011, 03:13 AM

Quote:

Originally Posted by texasfunk

My 86..under construction...

Cool!!!

How does that 6-banger move a CCLB?

Posted via Mobile Device

pat386 · 11-23-2011, 03:28 AM

Took these at slamfest in gainesville,fl back in october
Posted via Mobile Device

Evil Trailblazer SS · 11-23-2011, 09:51 AM

Quote:

Originally Posted by pat386

Took these at slamfest in gainesville,fl back in october
Posted via Mobile Device

A small part of me wants a 2WD to do just that...those trucks look sick!
Posted via Mobile Device

texasfunk · 11-23-2011, 12:10 PM

Quote:

Originally Posted by joe231

Cool!!!

How does that 6-banger move a CCLB?

Posted via Mobile Device

Hey joe how's it going? It pulls it pretty good! These 292's are torquey! But no fun!

I just got done pulling the 502 from my 81 though...so its going in this and viceversa

Posted via Mobile Device

joe231 · 11-23-2011, 12:52 PM

Quote:

Originally Posted by texasfunk

Hey joe how's it going? It pulls it pretty good! These 292's are torquey! But no fun!

I just got done pulling the 502 from my 81 though...so its going in this and viceversa

Posted via Mobile Device

Thomas,
I'm good, you?

That's great!!
It ought to be killer!!
Posted via Mobile Device

texasfunk · 11-23-2011, 03:15 PM

Quote:

Originally Posted by joe231

Thomas,
I'm good, you?

That's great!!
It ought to be killer!!
Posted via Mobile Device

Same same! Just tryuing to get stuff settled in at the new shop! And im hoping so! I plan on cutting about 77 inches out of the front of the bed, don't want a long bed bed but also don't want a short, don't think they look very good laid out...
Posted via Mobile Device

billybigrig1989 · 11-25-2011, 06:00 PM

I would be interested in talking to someone who has done the swap already. I am planning on putting a 5.9L in mine soon just looking to talk to a guy to see how tough it was to put in? SCOTI if you could PM me? it would be great thanks.

customisaak · 11-29-2011, 04:02 AM

its mostly my daily driver in the winter and trailer puller when i need a big truck i bought it for a drivetrain and for some reason it grew on me

yousesteers · 11-29-2011, 10:19 AM

Quote:

Originally Posted by billybigrig1989

I would be interested in talking to someone who has done the swap already. I am planning on putting a 5.9L in mine soon just looking to talk to a guy to see how tough it was to put in? SCOTI if you could PM me? it would be great thanks.

I did that to mine as soon as I get time I am going to do a build thread on it with how I did it. It is not terribly hard to do.

joe231 · 11-29-2011, 04:25 PM

Quote:

Originally Posted by customisaak

its mostly my daily driver in the winter and trailer puller when i need a big truck i bought it for a drivetrain and for some reason it grew on me

Nice!!

More pics and info please?
Posted via Mobile Device

Leedogg · 11-29-2011, 06:14 PM

Quote:

Originally Posted by billybigrig1989

Here is my boy I built from the ground up, got alot more pics if interested

Not a huge fan of Long beds- But this is one killer truck- you done a great job!

And HOLY CRAP- I just want my truck to sit like this one. I even love the 19's! i'm stealing this pic.LOL Hope you don't mind.

**Dieselwrencher** · 11-29-2011, 06:56 PM

This truck was posted on another board for sale and I figured I'd add it to this thread.

Mr Pops · 11-29-2011, 10:30 PM

Cool wheels on that last one^

yousesteers · 11-29-2011, 11:34 PM

Quote:

Originally Posted by yousesteers

I did that to mine as soon as I get time I am going to do a build thread on it with how I did it. It is not terribly hard to do.

Started my build thread under the projects sub forum

customisaak · 11-30-2011, 03:09 AM

thanks, awesome site for a chev nut, im new here tryin to figure how everything works. The "big dirty" is my 1980 Gmc 35, very original except for all the rust. Original .020 over 400 Block but built for some power/th400/205/d60, just finished the 14 bolt rebuild, the gov lock just grenaded hard even blew parts through the cover and im runnin 37/13.5/20 rubber with almost no lift (first pic was when i got it put on some 285s to drive it home)

joe231 · 11-30-2011, 03:13 AM

Right on!
Posted via Mobile Device

**Dieselwrencher** · 11-30-2011, 05:39 PM

Here's my 76 K30 now. Still a work in progress.

trout · 11-30-2011, 06:14 PM

dosnt even look the same

Mr Pops · 12-01-2011, 12:42 AM

Quote:

Originally Posted by customisaak

its mostly my daily driver in the winter and trailer puller when i need a big truck i bought it for a drivetrain and for some reason it grew on me

Sweet crewcab.. next time wave when I pass you on HWY 16! lol

jitteryguy · 12-01-2011, 02:46 PM

Quote:

Originally Posted by trout

nice trucks.......... wish i could find somer gmc grills tht year

I got the first grill and both core supports from a salvage yard in Grahm, Tx. the second grill was quite an ordeal, I wait'd 6 months for a new one. I finaly bought a used grill from a fellow board member and when the new grill did arive I had my girl friend put it away till I repaint the red truck.

11-23-2011, 01:37 AM	#3554
texasfunk Registered User Join Date: Jun 2009 Location: Lubbock, TX Posts: 1,671	Re: How about some pics of 73-91 crew cabs My 86..under construction... Posted via Mobile Device

11-23-2011, 03:28 AM	#3557
pat386 misshape grape Join Date: Nov 2008 Location: the badger Posts: 385	Re: How about some pics of 73-91 crew cabs Took these at slamfest in gainesville,fl back in october Posted via Mobile Device Attached Images __________________ Don't you just love rumors? I always find out stuff about myself that I had no idea I even did..

11-25-2011, 06:00 PM	#3562
billybigrig1989 Registered User Join Date: Nov 2011 Location: Calgary AB Posts: 45	Re: How about some pics of 73-91 crew cabs I would be interested in talking to someone who has done the swap already. I am planning on putting a 5.9L in mine soon just looking to talk to a guy to see how tough it was to put in? SCOTI if you could PM me? it would be great thanks.

11-29-2011, 04:02 AM	#3563
customisaak Registered User Join Date: Nov 2011 Location: Edmonton, Alberta Posts: 43	Re: How about some pics of 73-91 crew cabs its mostly my daily driver in the winter and trailer puller when i need a big truck i bought it for a drivetrain and for some reason it grew on me Attached Images __________________ 80 k35 3+3 DD (big dirty) 85 k1500 DD (scottsdale) and then a few more

11-29-2011, 06:56 PM	#3567
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: How about some pics of 73-91 crew cabs This truck was posted on another board for sale and I figured I'd add it to this thread. Attached Images __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-29-2011, 10:30 PM	#3568
Mr Pops Ridin' Dirty Join Date: Oct 2009 Location: Ardrossan Alberta Canada Posts: 2,193	Re: How about some pics of 73-91 crew cabs Cool wheels on that last one^ __________________ 1978 C3500 Crewcab (Project) 1979 C2500 Crewcab (Driver/project) 1988 R2500 Crewcab (Driver) 1988 V3500 Crewcab 1988 R2500 Crewcab (Mint, Ex Fire Dept) 1968 Chev Suburban (4x4 conversion) LINK 1970 Chev C20 Suburban (driver/cruiser)LINK 2005 Impala (Incognito vehicle) 2004 Yukon XL Denali (Kid hauler) 1947 Case tractor Facebook Page(1000's of pictures of GM cars and trucks organized into albums) YouTube Channel

11-30-2011, 03:09 AM	#3570
customisaak Registered User Join Date: Nov 2011 Location: Edmonton, Alberta Posts: 43	Re: How about some pics of 73-91 crew cabs thanks, awesome site for a chev nut, im new here tryin to figure how everything works. The "big dirty" is my 1980 Gmc 35, very original except for all the rust. Original .020 over 400 Block but built for some power/th400/205/d60, just finished the 14 bolt rebuild, the gov lock just grenaded hard even blew parts through the cover and im runnin 37/13.5/20 rubber with almost no lift (first pic was when i got it put on some 285s to drive it home) Attached Images __________________ 80 k35 3+3 DD (big dirty) 85 k1500 DD (scottsdale) and then a few more

11-30-2011, 03:13 AM	#3571
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: How about some pics of 73-91 crew cabs Right on! Posted via Mobile Device __________________ *CHEVY ONLY*

11-30-2011, 05:39 PM	#3572
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: How about some pics of 73-91 crew cabs Here's my 76 K30 now. Still a work in progress. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-30-2011, 06:14 PM	#3573
trout Registered User Join Date: Jun 2010 Location: lexington, SC Posts: 1,276	Re: How about some pics of 73-91 crew cabs dosnt even look the same __________________ Edited by staff



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.