need help from u fab guys - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

E's c10swbfleet · 07-18-2006, 01:23 AM

it was 9" from bottom of the frame to bottom of the notch. if u were to put a bump stop in the notch it and the frame would hit at the same time. then u could put some 2" blocks and u should have it.

smbrouss70 · 07-18-2006, 01:40 AM

thanks man!

Rydn2L0w · 07-30-2006, 10:45 PM

Quote:

Originally Posted by 67Fleet

Just throw some 6" blocks above the axle and you're in like flynn. hehe

Thats what im going to do. I talked to a guy last night with a 72 burban that is about a 1/4 " from laying the pinchweld. He told me all I have to do is add a 3 inch block between the trailing arms and axle. I really dont want to swap to a 4 link. I like the 2 link setup.

Rydn2L0w · 07-30-2006, 10:46 PM

Quote:

Originally Posted by E's c10swbfleet

it was 9" from bottom of the frame to bottom of the notch. if u were to put a bump stop in the notch it and the frame would hit at the same time. then u could put some 2" blocks and u should have it.

To Lay with 22's you need a 10" notch.

E's c10swbfleet · 08-03-2006, 02:51 AM

so close but yet so far. i thought id put the cab and bed on to see how things were lining up then fenders and co
re support. it was for insperation purposes aswell.

jlaird · 08-03-2006, 07:39 AM

good job man, looks awesome. I know how you feel. I had to scrap my first notch too, but it will be worth it in the end.

JessCo. Customs · 08-06-2006, 02:38 PM

Here man,you may have gone to far with it already but check this link out : http://www.fbimini.com/tech_guide.asp?idno=3520

Rydn2L0w · 08-06-2006, 02:53 PM

Quote:

Originally Posted by JessCo. Customs

Here man,you may have gone to far with it already but check this link out : http://www.fbimini.com/tech_guide.asp?idno=3520

I absolutely hate that style notch. It looks hideous in my book. I prefer notches made out of box tubing.

bagged74 · 08-06-2006, 07:53 PM

I prefer complete box tube frames too, but its not always feasible to do.

E's c10swbfleet · 08-07-2006, 12:08 AM

i like box tubing better to. Jessco thanx for the link,just waiting for the 2 1/2 drop spindle kit from cpp.

jlaird · 08-07-2006, 11:27 AM

That funny this came up after my post. That style notch is what I first started with and didn't like the way it looked, so tore it off and am now in the middle of doing an all box tube notch. Agree with all, looks much better. The plate notches I see usually end up looking like an appendage!

There are some exceptions. Heres one from SD.

E's c10swbfleet · 08-07-2006, 11:49 PM

i did really do a notch it was a lot easier and ithink it is cleaner. i just need to do the 4 link and reenforce with some tubing. (TUBING) is that word funny or what say a few times.

some more pics
the neighbor kid havin fun with the paint striper
the 65 we are also doing
starting the smooth fire wall on the 67

07-18-2006, 01:23 AM	#26
E's c10swbfleet Registered User Join Date: Apr 2006 Location: calif Posts: 64	Re: need help from u fab guys it was 9" from bottom of the frame to bottom of the notch. if u were to put a bump stop in the notch it and the frame would hit at the same time. then u could put some 2" blocks and u should have it.

07-18-2006, 01:40 AM	#27
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: need help from u fab guys thanks man! __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

08-03-2006, 02:51 AM	#30
E's c10swbfleet Registered User Join Date: Apr 2006 Location: calif Posts: 64	Re: need help from u fab guys so close but yet so far. i thought id put the cab and bed on to see how things were lining up then fenders and co re support. it was for insperation purposes aswell. Attached Images Last edited by E's c10swbfleet; 08-03-2006 at 02:54 AM.

08-03-2006, 07:39 AM	#31
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: need help from u fab guys good job man, looks awesome. I know how you feel. I had to scrap my first notch too, but it will be worth it in the end. Last edited by jlaird; 08-03-2006 at 12:57 PM.

08-06-2006, 02:38 PM	#32
JessCo. Customs Registered User Join Date: Aug 2006 Location: Topeka,Ks Posts: 26	Re: need help from u fab guys Here man,you may have gone to far with it already but check this link out : http://www.fbimini.com/tech_guide.asp?idno=3520

08-06-2006, 07:53 PM	#34
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: need help from u fab guys I prefer complete box tube frames too, but its not always feasible to do. Last edited by bagged74; 08-06-2006 at 07:54 PM.

08-07-2006, 12:08 AM	#35
E's c10swbfleet Registered User Join Date: Apr 2006 Location: calif Posts: 64	Re: need help from u fab guys i like box tubing better to. Jessco thanx for the link,just waiting for the 2 1/2 drop spindle kit from cpp.

08-07-2006, 11:27 AM	#36
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: need help from u fab guys That funny this came up after my post. That style notch is what I first started with and didn't like the way it looked, so tore it off and am now in the middle of doing an all box tube notch. Agree with all, looks much better. The plate notches I see usually end up looking like an appendage! There are some exceptions. Heres one from SD. Attached Images

08-07-2006, 11:49 PM	#37
E's c10swbfleet Registered User Join Date: Apr 2006 Location: calif Posts: 64	Re: need help from u fab guys i did really do a notch it was a lot easier and ithink it is cleaner. i just need to do the 4 link and reenforce with some tubing. (TUBING) is that word funny or what say a few times. some more pics the neighbor kid havin fun with the paint striper the 65 we are also doing starting the smooth fire wall on the 67 Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.