1960 K-20 transfercase shift boot - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

j.kirn · 12-02-2014, 08:00 PM

j.kirn · 12-02-2014, 08:01 PM

mitch Floyd found a nos 1 that I hope I get

j.kirn · 12-02-2014, 08:04 PM

that 67-72 shift boot is no good I have 1 and it lasted 1 summer , cheap stuff

**60-66** · 12-03-2014, 10:44 AM

MitchFloyd · 12-03-2014, 10:48 AM

Wonder if Powerpadguy could come up with a mold? I know that there are very few of us trying to restore factory 4x4's. And these boots are ultra rare and cost is crazy for them, kinda like the power pad petals.

**chevy_man5** · 12-03-2014, 11:25 AM

Thanks J.Kirn and 60-66. Those look nothing like the ones I have. LOL Oh well, wishful thinking.

MitchFloyd · 12-03-2014, 04:18 PM

Why the two different part #'s ? Is one a Napco #(2389300) and the other the GM # (668870) ? Also, I'm assumming that dealers were still putting left over Napco powerpaks on their trucks in 60 & 61 ? instead of ordering factory 4x4's?

**60-66** · 12-03-2014, 05:23 PM

Mitch, 668870 is the part number after 1970 in the parts history and parts book, it was superceded by 2389300 or earlier part number. Either are 60-66 . The 2389300 is also a GMC part number

MitchFloyd · 12-03-2014, 05:40 PM

thanks.

j.kirn · 12-03-2014, 06:35 PM

I should have the nos 1 by Saturday , thanks for letting me know about it mitch.

j.kirn · 12-06-2014, 09:10 PM

[URL=http://s615.photobucket.com/user/joek3167/media/Mobile%20Uploads/19A946DE-1A3C-4130-9FAB-4BE9A2C45FBA_zps2vdmbjza.jpg.html]

[/UR[URL=http://s615.photobucket.com/user/joek3167/media/Mobile%20Uploads/176DA5FC-FAAA-48B9-B8D0-61C560BBE235_zpsaaqrn6x4.jpg.html]

[/URL boot arrived today

MitchFloyd · 12-06-2014, 09:14 PM

Think it'll clean up ok?

j.kirn · 12-06-2014, 09:18 PM

yep it cleaned up like new

Riverside Racer · 06-21-2016, 07:38 PM

Thanks for your posts.
\

I used a shift boot from 63 Ford Galaxie.
The round one for a four speed no console car.

1962-64 FORD GALAXIE 4 SPEED SHIFT BOOT C2AZ7277A
$26.99 on old ebay.

Fit perfectly. About an 1/8" smaller outside diameter. Drilled two new holes in it so I could use my old hold down ring.

61K10 · 01-01-2017, 01:55 PM

there was an nos one just on e-bay wanted some big $$$ for it. anybody here get it?

12-02-2014, 08:00 PM	#26
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: 1960 K-20 transfercase shift boot

12-02-2014, 08:01 PM	#27
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: 1960 K-20 transfercase shift boot mitch Floyd found a nos 1 that I hope I get

12-02-2014, 08:04 PM	#28
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: 1960 K-20 transfercase shift boot that 67-72 shift boot is no good I have 1 and it lasted 1 summer , cheap stuff

12-03-2014, 10:44 AM	#29
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: 1960 K-20 transfercase shift boot __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

12-03-2014, 10:48 AM	#30
MitchFloyd Registered User Join Date: Feb 2013 Location: Dallas, Tx Posts: 286	Re: 1960 K-20 transfercase shift boot Wonder if Powerpadguy could come up with a mold? I know that there are very few of us trying to restore factory 4x4's. And these boots are ultra rare and cost is crazy for them, kinda like the power pad petals. __________________ '62 Chevy K10

12-03-2014, 11:25 AM	#31
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1960 K-20 transfercase shift boot Thanks J.Kirn and 60-66. Those look nothing like the ones I have. LOL Oh well, wishful thinking. __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

12-03-2014, 04:18 PM	#32
MitchFloyd Registered User Join Date: Feb 2013 Location: Dallas, Tx Posts: 286	Re: 1960 K-20 transfercase shift boot Why the two different part #'s ? Is one a Napco #(2389300) and the other the GM # (668870) ? Also, I'm assumming that dealers were still putting left over Napco powerpaks on their trucks in 60 & 61 ? instead of ordering factory 4x4's? __________________ '62 Chevy K10

12-03-2014, 05:23 PM	#33
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: 1960 K-20 transfercase shift boot Mitch, 668870 is the part number after 1970 in the parts history and parts book, it was superceded by 2389300 or earlier part number. Either are 60-66 . The 2389300 is also a GMC part number __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

12-03-2014, 05:40 PM	#34
MitchFloyd Registered User Join Date: Feb 2013 Location: Dallas, Tx Posts: 286	Re: 1960 K-20 transfercase shift boot thanks. __________________ '62 Chevy K10

12-03-2014, 06:35 PM	#35
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: 1960 K-20 transfercase shift boot I should have the nos 1 by Saturday , thanks for letting me know about it mitch.

12-06-2014, 09:10 PM	#36
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: 1960 K-20 transfercase shift boot [URL=http://s615.photobucket.com/user/joek3167/media/Mobile%20Uploads/19A946DE-1A3C-4130-9FAB-4BE9A2C45FBA_zps2vdmbjza.jpg.html][/UR[URL=http://s615.photobucket.com/user/joek3167/media/Mobile%20Uploads/176DA5FC-FAAA-48B9-B8D0-61C560BBE235_zpsaaqrn6x4.jpg.html][/URL boot arrived today

12-06-2014, 09:14 PM	#37
MitchFloyd Registered User Join Date: Feb 2013 Location: Dallas, Tx Posts: 286	Re: 1960 K-20 transfercase shift boot Think it'll clean up ok? __________________ '62 Chevy K10

12-06-2014, 09:18 PM	#38
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: 1960 K-20 transfercase shift boot yep it cleaned up like new

06-21-2016, 07:38 PM	#39
Riverside Racer Registered User Join Date: Apr 2012 Location: Costa Mesa, CA Posts: 3	Re: 1960 K-20 transfercase shift boot Thanks for your posts. \ I used a shift boot from 63 Ford Galaxie. The round one for a four speed no console car. 1962-64 FORD GALAXIE 4 SPEED SHIFT BOOT C2AZ7277A $26.99 on old ebay. Fit perfectly. About an 1/8" smaller outside diameter. Drilled two new holes in it so I could use my old hold down ring.

01-01-2017, 01:55 PM	#40
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: 1960 K-20 transfercase shift boot there was an nos one just on e-bay wanted some big $$$ for it. anybody here get it? __________________ 1961 chevy K10 my build is------------61K10 build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.