Daverods project 66 - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jgh64pkup · 10-17-2009, 08:26 PM

i dont get it

daverod · 10-17-2009, 08:27 PM

Quote:

Originally Posted by jgh64pkup

i dont get it

He's from Star.

I can see how it would be confusing.

jgh64pkup · 10-17-2009, 08:29 PM

oh ok bubba is from star
what kinda trans

bubba327 · 10-17-2009, 10:07 PM

Wahoo!!!
My old tranny is sitting on the garage floor tonight. Spent all darn day learning about tilt columns. I could not get it back together where it was not loose. Finally when I found an exploded view I could see , I had a piece in backwards. Works good now. Steering wheel is on and every thing. Truck is lifted up and on jackstands now and it is Transmission time.
Dave, look out -- I'm catching up --- I would post a picture but I haven't figured out how yet!!

daverod · 10-17-2009, 10:10 PM

Quote:

Originally Posted by bubba327

Wahoo!!!
My old tranny is sitting on the garage floor tonight. Spent all darn day learning about tilt columns. I could not get it back together where it was not loose. Finally when I found an exploded view I could see , I had a piece in backwards. Works good now. Steering wheel is on and every thing. Truck is lifted up and on jackstands now and it is Transmission time.
Dave, look out -- I'm catching up --- I would post a picture but I haven't figured out how yet!!

Do it this way [img] enter the properties of the image then [/img] Right click on the picture properties is at the bottom, select all , then copy the address and paste between the two img things. Take lots of pictures so I'll know what to do. Good work.

bubba327 · 10-17-2009, 10:16 PM

Dave--Why does your avitar say you are offline right now? Bubba

daverod · 10-17-2009, 10:30 PM

Quote:

Originally Posted by bubba327

Dave--Why does your avitar say you are offline right now? Bubba

I just set it to stealth mode. I spend some much time on here I feel guilty

And because I want to be like Allan

Alan's Classic · 10-18-2009, 10:05 PM

Quote:

Originally Posted by daverod

I just set it to stealth mode. I spend some much time on here I feel guilty

And because I want to be like Allan

Man, you gave away the secret.

You don't want to be like me, just ask my wife.

daverod · 10-18-2009, 10:08 PM

Quote:

Originally Posted by Alan's Classic

Man, you gave away the secret.

You don't want to be like me, just ask my wife.

He's not going to fork up the 7 cents away.

Your secret is safe. I think your buddy is trying to fix his tailgate with a tree.

jgh64pkup · 10-18-2009, 10:12 PM

i might do the year subsription

bubba327 · 10-17-2009, 11:10 PM

that e-brake teeter/totter arrangement on the back brace is different! Do both old frame braces have to come out? I have a new mount for the TH350.

jgh64pkup · 10-18-2009, 12:22 AM

i want to be like alan too but i dont know the ancient chinese secret that he does so this is all i got

daverod · 10-18-2009, 09:25 PM

Quote:

Originally Posted by jgh64pkup

i want to be like alan too but i dont know the ancient chinese secret that he does so this is all i got

It cost $25 to learn the secret.

It's at the top of the page under subscribe.

It works out to $25/360=.069. Just round it off to 7 cents a day.

jgh64pkup · 10-18-2009, 09:35 PM

so your on right now

daverod · 10-18-2009, 09:37 PM

Quote:

Originally Posted by jgh64pkup

so your on right now

Maybe. Maybe not

daverod · 10-18-2009, 09:37 AM

Quote:

Originally Posted by bubba327

that e-brake teeter/totter arrangement on the back brace is different! Do both old frame braces have to come out? I have a new mount for the TH350.

I don't know? Sorry

ruffrida2005 · 10-18-2009, 10:25 PM

I think Dave needs to stay away from the crack pipe. And needs to learn how to weld better then what my old C-Notch looked like. haha

daverod · 10-18-2009, 10:32 PM

Quote:

Originally Posted by ruffrida2005

I think Dave needs to stay away from the crack pipe. And needs to learn how to weld better then what my old C-Notch looked like. haha

You blamed that on your friend. That was probably your first weld job.

No crack in my pipe.

I have a prescription.

I wish.

My god. That thing is a work of art you should be proud of your work. HaHaha No wait there's more

Hahahahha

jgh64pkup · 10-18-2009, 10:40 PM

hey dave did you weld that

daverod · 10-18-2009, 10:45 PM

Quote:

Originally Posted by jgh64pkup

hey dave did you weld that

No that's all Ruffs work It was his first weld job.

He tried to blame it on his friend.

spudtruck · 10-18-2009, 11:33 PM

Hey Daverod this is spud truck I'm up by Rexburg. Just some Fyi there are two trucks at Cross's Crashes in the Falls. One is a 63 big window and I think the other is about a 65 GMC. There is also one at Holst truck parts I think it was a 65 chevy. Can't remember what trans they had in them. There is also another 65 on Craigs list in Rigby it has some pretty cool looking old school slotted mags. It was 400 obo. Just thought I'd let you know. By the way what an awsome build thread.

jgh64pkup · 10-18-2009, 11:34 PM

glad to have you on here

daverod · 10-18-2009, 11:44 PM

Quote:

Originally Posted by spudtruck

Hey Daverod this is spud truck I'm up by Rexburg. Just some Fyi there are two trucks at Cross's Crashes in the Falls. One is a 63 big window and I think the other is about a 65 GMC. There is also one at Holst truck parts I think it was a 65 chevy. Can't remember what trans they had in them. There is also another 65 on Craigs list in Rigby it has some pretty cool looking old school slotted mags. It was 400 obo. Just thought I'd let you know. By the way what an awsome build thread.

Cool welcome Is this cross place a car lot? Da crashes. It must be a junk yard. I heard the Falls have good yards. I saw the one on craigs. Is that spud truck your daily driver?

spudtruck · 10-18-2009, 11:46 PM

Really glad to be here!!! I put a short blub about me on the main page.

daverod · 10-18-2009, 11:51 PM

It surpises me how many people are on here from Idaho. You'll like it here. Lots of good info. Look back a few pages Strodder just told me how to post pictures. Works for now still can't post from my computer though

10-17-2009, 08:26 PM	#1
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 i dont get it __________________ Gage 1967 C10 Shortbed Stepside

10-17-2009, 08:29 PM	#3
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 oh ok bubba is from star what kinda trans __________________ Gage 1967 C10 Shortbed Stepside

10-17-2009, 10:07 PM	#4
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 Wahoo!!! My old tranny is sitting on the garage floor tonight. Spent all darn day learning about tilt columns. I could not get it back together where it was not loose. Finally when I found an exploded view I could see , I had a piece in backwards. Works good now. Steering wheel is on and every thing. Truck is lifted up and on jackstands now and it is Transmission time. Dave, look out -- I'm catching up --- I would post a picture but I haven't figured out how yet!! __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

10-17-2009, 10:16 PM	#6
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 Dave--Why does your avitar say you are offline right now? Bubba __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

10-18-2009, 10:12 PM	#10
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 i might do the year subsription __________________ Gage 1967 C10 Shortbed Stepside

10-17-2009, 11:10 PM	#11
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 that e-brake teeter/totter arrangement on the back brace is different! Do both old frame braces have to come out? I have a new mount for the TH350. __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

10-18-2009, 12:22 AM	#12
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 i want to be like alan too but i dont know the ancient chinese secret that he does so this is all i got __________________ Gage 1967 C10 Shortbed Stepside

10-18-2009, 09:35 PM	#14
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 so your on right now __________________ Gage 1967 C10 Shortbed Stepside

10-18-2009, 10:25 PM	#17
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 I think Dave needs to stay away from the crack pipe. And needs to learn how to weld better then what my old C-Notch looked like. haha __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

10-18-2009, 10:40 PM	#19
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 hey dave did you weld that __________________ Gage 1967 C10 Shortbed Stepside

10-18-2009, 11:33 PM	#21
spudtruck Registered User Join Date: Oct 2009 Location: Rigby Idaho Posts: 88	Re: Daverods project 66 Hey Daverod this is spud truck I'm up by Rexburg. Just some Fyi there are two trucks at Cross's Crashes in the Falls. One is a 63 big window and I think the other is about a 65 GMC. There is also one at Holst truck parts I think it was a 65 chevy. Can't remember what trans they had in them. There is also another 65 on Craigs list in Rigby it has some pretty cool looking old school slotted mags. It was 400 obo. Just thought I'd let you know. By the way what an awsome build thread.

10-18-2009, 11:34 PM	#22
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 glad to have you on here __________________ Gage 1967 C10 Shortbed Stepside

10-18-2009, 11:46 PM	#24
spudtruck Registered User Join Date: Oct 2009 Location: Rigby Idaho Posts: 88	Re: Daverods project 66 Really glad to be here!!! I put a short blub about me on the main page.

10-18-2009, 11:51 PM	#25
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 It surpises me how many people are on here from Idaho. You'll like it here. Lots of good info. Look back a few pages Strodder just told me how to post pictures. Works for now still can't post from my computer though __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 10-18-2009 at 11:59 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.