58 GMC Project - Page 23 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CAL 58 GMC · 12-11-2006, 08:16 PM

Quote:

Originally Posted by Sweet&LowPro55

Super nice truck to be proud of when you getter' all done... Love the color !!

Thanks man!

watahyahknow · 12-11-2006, 10:01 PM

Quote:

Originally Posted by Daniel U

Anyone know if they are mandatory if you have an interior rear view mirror?

out here in the netherlands you need the passengerside outer mirror if you dont have the inboard or carrie so mush cargo that visibility is impared through the imboard mirror .
kindah makes sence all over the world i think : if you drive a big rig with a sleeper cab or a closed van without rearwindows you dont see a thing in the inboard mirror anyway

56chevy1300 · 12-18-2006, 12:51 PM

Hi Cal 58 GMC

I have 2 questions for you:

1) Is your axle centerline on your camaro subframe the same as stock?

2) Where did you get your rear spring lowering blocks?

Thanks

CAL 58 GMC · 12-18-2006, 08:07 PM

Quote:

Originally Posted by 56chevy1300

Hi Cal 58 GMC

I have 2 questions for you:

1) Is your axle centerline on your camaro subframe the same as stock?

2) Where did you get your rear spring lowering blocks?

Thanks

I'm not sure what you mean by "centerline"

The blocks I got from Summit Racing

56chevy1300 · 12-18-2006, 09:22 PM

My apologies, is your wheelbase the same as stock, or do you know if your camaro subframe has been moved forward to center the wheels in the wheelwells?

Thanks in Advance!

CAL 58 GMC · 12-19-2006, 01:14 AM

Quote:

Originally Posted by 56chevy1300

My apologies, is your wheelbase the same as stock, or do you know if your camaro subframe has been moved forward to center the wheels in the wheelwells?

Thanks in Advance!

The sub-frame was already in when I bought the truck, but from what I can tell it was moved forward slightly. The wheels are setting centered in the wheel wells.

fuchster · 12-27-2006, 06:10 PM

Hello:
Happy holidays...
Quick question, on your power steering pump which is the oulet? Is it the lower one?
Thanks

55ChevyPU · 12-27-2006, 08:44 PM

Fuchster- on the back of a saginaw pump "I am assuming that is what you are talking about" the return line is the little tube thingy. That connects to the steering box valve that is closer to the cab. The actual threaded valve on the pump connects to the valve on the steering box that is closer to the cab.

fuchster · 12-27-2006, 11:39 PM

55Chevypu:
Thanks, that answers the question.

Coronas56 · 12-29-2006, 09:01 PM

Say Julian Here in Minneapolis, When you installed your subframe, did you move it forward an 1 inch or so, or do you still have the 114 inch wheel base? If it was moved forward, what is your wheel base? thanks

CAL 58 GMC · 12-30-2006, 03:45 PM

I finished mounting the steering column. I had to fabricate a plate for the floor. Here's a picture of it and a few more.

entourageguy · 12-30-2006, 03:52 PM

Looks great Cal. I haven't seen my truck for over a month so my son and I went to say "hi" at the storage barn my cousin has. Enjoy working on your truck Cal it's going to look amazing.
Brian ...

Jebb1978 · 12-30-2006, 06:08 PM

Look'n good buddy! You continue to inspire!

CAL 58 GMC · 12-30-2006, 10:16 PM

Quote:

Originally Posted by entourageguy

Looks great Cal. I haven't seen my truck for over a month so my son and I went to say "hi" at the storage barn my cousin has. Enjoy working on your truck Cal it's going to look amazing.
Brian ...

Thanks Brian! Do you store yours for the winter?

Quote:

Originally Posted by Jebb1978

Look'n good buddy! You continue to inspire!

Thank buddy! Did Santa give you all you wanted for Christmas?

entourageguy · 12-30-2006, 10:40 PM

[QUOTE=CAL 58 GMC;1964204]Thanks Brian! Do you store yours for the winter?

Yea I actually made it to the end of November and finally put it away. There have been some warm days still with very little snow. But once it gets cold and the posibility of ice the salt goes down. I'm hoping for a short winter so I can get it out to do the 4-link.
Brian ...

pgf545 · 12-31-2006, 01:48 AM

Looking good Cal, I am going to be in your area in Feb and would like to stop by and check it out in person if that is OK. Let me know.

Bernie

Jebb1978 · 12-31-2006, 06:42 PM

Quote:

Originally Posted by CAL 58 GMC

Thank buddy! Did Santa give you all you wanted for Christmas?

Yeah, I got more than I would have ever imagined. My Dad seems really excited for me to have my own garage to work in. He bought me some of the essentials like a bench grinder, vast array of pneumatic tools and I got lots of other goodies. How did you do?

54chevy · 12-31-2006, 11:37 PM

I spent the better part of Saturday reading every page you have and your truck is coming along beautiful. great job! I am new to the site and I am reading as much as I can and getting ideas as I get ready to tackle my own 54 5 window soon. The first thing I am going to do is get a '76 camaro subframe under it. I look forward to seeing your next pics.

CAL 58 GMC · 01-01-2007, 01:50 PM

Quote:

Originally Posted by pgf545

Looking good Cal, I am going to be in your area in Feb and would like to stop by and check it out in person if that is OK. Let me know.

Bernie

Hey Bernie, I sent you a P.M.

CAL 58 GMC · 01-01-2007, 01:52 PM

Quote:

Originally Posted by Jebb1978

Yeah, I got more than I would have ever imagined. My Dad seems really excited for me to have my own garage to work in. He bought me some of the essentials like a bench grinder, vast array of pneumatic tools and I got lots of other goodies. How did you do?

Cool, you can never have to many tools! I had a great Christmas with myself!

CAL 58 GMC · 01-01-2007, 02:01 PM

Quote:

Originally Posted by 54chevy

I spent the better part of Saturday reading every page you have and your truck is coming along beautiful. great job! I am new to the site and I am reading as much as I can and getting ideas as I get ready to tackle my own 54 5 window soon. The first thing I am going to do is get a '76 camaro subframe under it. I look forward to seeing your next pics.

Welcome to the board! Feel free to ask anyone here questions you might have. We all love working on these old truck and are always willing to shear thoughts and ideas. As for using a Camaro Sub-frame on a 54, as I understand it, the frame on your 54 is narrower then the Camaro. You might have to go with a Mustang II IFS.

watahyahknow · 01-02-2007, 09:47 AM

Quote:

Originally Posted by CAL 58 GMC

Welcome to the board! Feel free to ask anyone here questions you might have. We all love working on these old truck and are always willing to shear thoughts and ideas. As for using a Camaro Sub-frame on a 54, as I understand it, the frame on your 54 is narrower then the Camaro. You might have to go with a Mustang II IFS.

the mustang suspension seems to be better too it has the rack and pinion steeringsystem wish has less play in it than the stock system making it go straight a lot eazier too

skanave · 01-08-2007, 07:18 PM

wheres the bed?

CAL 58 GMC · 01-08-2007, 07:24 PM

Quote:

Originally Posted by skanave

wheres the bed?

I hav'nt made my bed yet.

watahyahknow · 01-09-2007, 12:41 PM

there was this german guy here on the board 2 tree days ago introducing himself .
he had a picture of a 60 cmc with a bed made out of the sides of a 55 bel air looked pretty nice .

12-18-2006, 12:51 PM	#553
56chevy1300 Registered User Join Date: Dec 2006 Location: Edmonton, Alberta Posts: 522	Re: 58 GMC Project Hi Cal 58 GMC I have 2 questions for you: 1) Is your axle centerline on your camaro subframe the same as stock? 2) Where did you get your rear spring lowering blocks? Thanks

12-18-2006, 09:22 PM	#555
56chevy1300 Registered User Join Date: Dec 2006 Location: Edmonton, Alberta Posts: 522	Re: 58 GMC Project My apologies, is your wheelbase the same as stock, or do you know if your camaro subframe has been moved forward to center the wheels in the wheelwells? Thanks in Advance!

12-27-2006, 06:10 PM	#557
fuchster Registered User Join Date: Nov 2006 Location: San Diego Posts: 21	Re: 58 GMC Project Hello: Happy holidays... Quick question, on your power steering pump which is the oulet? Is it the lower one? Thanks

12-27-2006, 08:44 PM	#558
55ChevyPU Registered User Join Date: Jan 2006 Location: Riverside, California Posts: 282	Re: 58 GMC Project Fuchster- on the back of a saginaw pump "I am assuming that is what you are talking about" the return line is the little tube thingy. That connects to the steering box valve that is closer to the cab. The actual threaded valve on the pump connects to the valve on the steering box that is closer to the cab. __________________ 55' Chevy Pickup Project Thread '55 chevy pics

12-27-2006, 11:39 PM	#559
fuchster Registered User Join Date: Nov 2006 Location: San Diego Posts: 21	Re: 58 GMC Project 55Chevypu: Thanks, that answers the question.

12-29-2006, 09:01 PM	#560
Coronas56 Registered User Join Date: Nov 2005 Location: Tropical Minnesota Posts: 282	Re: 58 GMC Project Say Julian Here in Minneapolis, When you installed your subframe, did you move it forward an 1 inch or so, or do you still have the 114 inch wheel base? If it was moved forward, what is your wheel base? thanks Last edited by Coronas56; 12-30-2006 at 03:16 PM. Reason: asked more questions

12-30-2006, 03:45 PM	#561
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: 58 GMC Project I finished mounting the steering column. I had to fabricate a plate for the floor. Here's a picture of it and a few more. Attached Images __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4 Last edited by CAL 58 GMC; 12-30-2006 at 10:23 PM.

12-30-2006, 03:52 PM	#562
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: 58 GMC Project Looks great Cal. I haven't seen my truck for over a month so my son and I went to say "hi" at the storage barn my cousin has. Enjoy working on your truck Cal it's going to look amazing. Brian ... __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited

12-30-2006, 06:08 PM	#563
Jebb1978 Senior Member Join Date: Aug 2005 Location: Mesa,Az Posts: 3,713	Re: 58 GMC Project Look'n good buddy! You continue to inspire! __________________ 1959 GMC project

12-30-2006, 10:40 PM	#565
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: 58 GMC Project [QUOTE=CAL 58 GMC;1964204]Thanks Brian! Do you store yours for the winter? Yea I actually made it to the end of November and finally put it away. There have been some warm days still with very little snow. But once it gets cold and the posibility of ice the salt goes down. I'm hoping for a short winter so I can get it out to do the 4-link. Brian ... __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited

12-31-2006, 01:48 AM	#566
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: 58 GMC Project Looking good Cal, I am going to be in your area in Feb and would like to stop by and check it out in person if that is OK. Let me know. Bernie __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021

12-31-2006, 11:37 PM	#568
54chevy Registered User Join Date: Dec 2006 Location: Memphis,TN Posts: 8	Re: 58 GMC Project I spent the better part of Saturday reading every page you have and your truck is coming along beautiful. great job! I am new to the site and I am reading as much as I can and getting ideas as I get ready to tackle my own 54 5 window soon. The first thing I am going to do is get a '76 camaro subframe under it. I look forward to seeing your next pics.

01-08-2007, 07:18 PM	#573
skanave Registered User Join Date: May 2006 Location: Clovis, CA Posts: 80	Re: 58 GMC Project wheres the bed?

01-09-2007, 12:41 PM	#575
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 58 GMC Project there was this german guy here on the board 2 tree days ago introducing himself . he had a picture of a 60 cmc with a bed made out of the sides of a 55 bel air looked pretty nice . __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts Last edited by watahyahknow; 01-09-2007 at 10:24 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.